HOOYA PJ-625C
Price:
Negotiable
MOQ:
300
Delivery Time:
5-6周
Brand:
PJ-625C
Product Description
Product Overview
This document details the specifications for the HAOYU (HONG KONG) LIMITED 6.35mm Phone Jack (DIP) Series & #6.35@fR=CH 4 | TYPE & BU%E (B). It covers electrical, mechanical, and durability performance characteristics, along with application notes.
Brand HAOYU (HONG KONG) LIMITED
Model/Series 6.35mm Phone Jack (DIP) Series & #6.35@fR=CH 4 | TYPE & BU%E (B)
Date 2008-07-23
Specification Number #&31Z $ B2 IR HI1H H3H
| Item | Test Conditions | Specifications | Remarks |
|---|---|---|---|
| 1 - RATING | DC50V 1A | ||
| 2 - OPERATING TEMPERATURE RANGE | -20C~70C | PRESERVATIVE TEMPERATURE RANGE: 15C~35C | |
| 3 - ELECTRICAL PERFORMANCE | CONTACT RESISTANCE | 70m max (at 0.1A DC5V, average of successive measurements) | |
| INSULATION RESISTANCE | 100M min (between terminals and frame, 250V DC for 1 min) | ||
| DIELECTRIC STRENGTH | WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC (between terminals and frame, 250V AC for 1 min) | ||
| 4 - MECHANICAL PERFORMANCE | INSERTION AND WITHDRAWAL FORCE | 3 - 40N | Measured across spring piece and matching plug. |
| STRENGTH | 10N (1000gf) for 60 sec. applied to the tip of terminals in any direction of actuator. | Without damage or excessive looseness. | |
| 4C - ATMOSPHERIC CONDITIONS FOR MEASUREMENTS AND TESTS | AMBIENT TEMPERATURE | 15C TO 35C | |
| RELATIVE HUMIDITY | 25% TO 75%RH | ||
| AIR PRESSURE | 80Kpa TO 106Kpa |
| Item | Test Conditions | Specifications | Remarks |
|---|---|---|---|
| 5 - DURABILITY | SOLDERING HEAT TEST (Wave) | Within 3 seconds at 260 5C | Without deformation of case, resistance or excessive looseness of terminals. |
| SOLDERING HEAT TEST (Hand) | Within 3 seconds at 380C or below | ||
| LIFE TEST | 200m max (Contact Resistance) | 5000 cycles at a speed of 30 cycles/min. Electrical characteristics shall be satisfied. | |
| HEAT TEST | 852C for 48 hours, then keep in normal condition for 30 minutes. No damage on appearance. | ||
| HUMIDITY TEST | 402C 90-96%RH for 48 hours, test after keeping in normal condition for 30 min. Mechanical and electrical characteristics shall be satisfied. | ||
| COLD TEST | -402C for 48 hrs. After test keep in normal condition for 30 min. | ||
| SALT SPRAY TEST | 5% NaCl liquor for 24 hours, after washing, keep in normal condition for 30 min. Without excessive corrosion or crack in appearance. |
Application Notes
- Rosin and other insulating and caustic material cannot be dipped into the rocket during soldering.
- Products cannot be blown with air gun or cleaned with a solvent after soldering.
- All parts of the products cannot be dissolved before soldering.
- Avoid storing the products in a place at high temperature, high humidity and in corrosive gases.
- Shelf life is less than 180 days since the goods were sent out from our factory.
- Please report any inferior goods discovered for note, check, track and improvement.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sellina