H3C RA5300 Carrier-Grade 5G IPRAN Access Router with Dual AC/DC Power Input, Wire-Speed 10GE Aggregation, and Level-8 Aseismic Grade
Price:
depending on order quantity and specific model
MOQ:
1
Delivery Time:
15 working days
Brand:
H3C
Product Description
H3C RA5300(DC/AC) Carrier-Grade 5G IPRAN Access Router
Dual AC/DC Power Input, Wire-Speed 10GE Aggregation for Operator Backhaul & Enterprise Private Network
The H3C RA5000 series represents high-performance integrated access routers specifically designed for 5G network backhaul scenarios. These routers meet the sustainable development needs of operators and large enterprise dedicated networks, helping improve network bandwidth, deployment efficiency, and reduce operational costs.
5G Network Characteristics
- High-speed: Maximum downlink bandwidth up to 10 Gbps (50-100x 4G networks), supporting 4K and VR media transmission
- Large capacity: Utilizes high-frequency spectrum resources and massive MIMO technology to serve more terminals simultaneously
- Low latency: Network delay as low as 1 millisecond, critical for autonomous driving, emergency response, and industrial control
Hardware Specifications
| Item | RA5100-G(DC/AC) | RA5100-G-HI(DC/AC) | RA5300(DC/AC) |
|---|---|---|---|
| Switching capacity | 144Gbps | 1.24Tbps | 1.6Tbps |
| Forwarding performance | 214Mpps | 590Mpps | 590Mpps |
| Master control | Centralized | Centralized | 1:1 redundancy |
| Fixed interface | 6*10GE/GE+8*GEF/FEF+4*GE | 2*100GE/50GE/40GE+16*25GE/10GE/GE +8*GEF/FEF+4*GE+8*GEF(CSFP) | N/A |
| RIB v4/v6 | 1M/1M | 1M/1M | 1M/1M |
| FIB v4/v6 | 1M/1M | 1M/1M | 1M/1M |
| MAC | 96K | 96K | 96K |
| Reset key | 1 | 1 | 1 |
| HRIC slot | N/A | N/A | AC: 7/DC: 8 |
| Network management interface | 1GE/FE | 1GE/FE | 1GE/FE |
| ALMI/ALMO | 1(RJ45, 3 in 1 out) | 1(RJ45, 3 in 1 out) | 1(RJ45, 3 in 1 out) |
| TOD | 1(RJ45) | 1(RJ45) | 1(RJ45) |
| CLK | 1(RJ45) | 1(RJ45) | 1(RJ45) |
| Redundant power supply | 1+1 redundancy | 1+1 redundancy | 1+1 redundancy (pluggable) |
| DC power supply | -48 ~ -60V | -48 ~ -60V | -48 ~ -60V |
| AC power supply | 100-240Vac, 50/60Hz, 3A or DC 240V/2A | 100-240Vac, 50/60Hz, 3A or DC 240V/2A | 200~240V/100-127VAC dual live wire, 50/60Hz, 10-6A or DC 240V/5A |
| Fan frame | 1(2*Fans) | 1(3*Fans) | 1 (pluggable) |
| Frame height (U height) | 1RU | 1RU | 3.5RU |
| Outward size (W * D * H, mm) | 440*205*44 | 440*205*44 | 440*220*163.5 |
| Aseismic grade | level-8 | level-8 | level-8 |
| Operating temperature | -20-60ºC | -20-60ºC | -20-60ºC |
| Operational altitude | 5000m | 5000m | 5000m |
| Ambient relative humidity | 5~95%, non-condensing | 5~95%, non-condensing | 5~95%, non-condensing |
Software Specifications
| Item | Specification |
|---|---|
| Layer 2 protocol | Support Ethernet, Ethernet II, VLAN, 802.1p, 802.1Q, LLDP, QinQ, 802.3d (STP), 802.3w (RSTP), 802.3s (MSTP), IEEE 802.3ad (link aggregation), Port mirroring, IEEE 802.3ah OAM, DHCP Snooping, IGMP/MLD Snooping |
| Application of IP | Support Eth-Trunk Support FlexE Network Slicing Support Ping, Trace Support DHCP Server, DHCP Relay, DHCP Client Support DNS client, DNS Proxy Support NTP, SNTP |
| IPv4 routing and multicast | Static routing Routing Policy Dynamic routing protocols: OSPFv2, BGP, IS-IS ECMP (Equivalent Multipath) Multicast routing protocols: IGMPV1/V2/V3, PIM-DM, PIM-SM |
| IPv6 routing and multicast | Static routing Routing Policy Support IPv4 and IPv6 dual stack Dynamic routing protocols: OSPFv3, IS-ISv6, BGP4+ Support Ipv6 ND, Ipv6 PMTU, Ipv6 FIB, Ipv6 ACL,6PE IPv6 Multicast Protocol: MLD V1/V2, PIM-DM, PIM-SM |
| QoS | Support LR Support CAR (Committed Access Rate) Support FIFO, SP, WFQ Support GTS (Generic Traffic Shaping) Support HQoS |
| Security | Local Authentication, RBAC, Radius, Tacacs ACL, FILTER PKI, SSH, URPF Support ARP Attack Prevention Control Plane Anti-Attack Characteristic |
| MPLS | Support LDP Support MPLS L2/L3 VPN, MPLS TE, MPLS RSVP-TE, MPLS TE Hot-standby backup Support Segment Routing Support EVPN Support IPv6 MPLS L3VPN |
| SDN technology | Support EVPN Support network information collection protocols such as BGP-LS Support Netconf and YANG protocols Support MPLS SR and SRv6 Support Telemetry protocol Support SRv6 Policy function for SRv6 BE failover Support SRv6 Policy optimization based on delay/bandwidth/packet loss rate |
| Network slicing | Support FlexE network slicing Support sub-interface slicing Support network slicing by SliceID |
| Reliability | Support MPLS L2VPN FRR, MPLS L3VPN FRR, OSPF/ISIS FRR, PW redundancy, LFA Support BFD for ISIS, OSPF, BGP, PW, LDP Support LFA, LSP (1:1) tunnel protection, PW Redundancy service protection Support VRRP, VRRPv3 Supporting load balance and backup Support GR Support NSR Supports iFIT (in-situ Flow Information Telemetry) for real-time network quality detection and visualized management |
| OAM | Support BFD OA Support Y.1731, RFC2544, TWAMP Light, Y.1564 |
| Clock synchronization | Support SyncE Support 1588V2 Support BMC (Best Master Clock) algorithm |
| Management and maintenance | Support DCN Operator Network Management Automation Support SNMP V1/V2c/V3, NETCONF, MIB, SYSLOG, RMON Support Telemetry Support for Dying Gasp Support command line management, file system management Support Console/Telnet/SSH and other management methods Support EAA (Embedded Automation Architecture) |
Key Features
- Dual master control, fan redundancy, power redundancy (RA5300), supporting AC and DC power
- Professional integrated business processing engine with line-speed processing capabilities
- Support for GE, 10GE, 25GE, 50GE, 100GE interface types
- Comprehensive MPLS L2/L3 VPN, MPLS TE, Segment Routing, EVPN, FlexE features
- Advanced clock synchronization with ToD+1PPS and BITS clock interfaces
- Hardware coprocessor ensuring nanosecond-level clock accuracy
- Comprehensive OAM functions including BFD, Y.1731, RFC2544, TWAMP Light, Y.1564
- Support for SR/SRv6, iFIT, EVPN, and Telemetry advanced features
- AD-WAN backbone solution integration with H3C controllers
- Multiple network slicing technologies with FlexE slicing at 10Mbps level
- 220mm depth design for base station cabinet deployment
- Operating temperature range: -20ºC to 60ºC
- Continuous IPv6 evolution capability
Carrier-Grade Reliability
Support for abundant reliability characteristics ensures uninterrupted network operation with millisecond-level switching capabilities and comprehensive fault detection mechanisms.
High Precision Clock Synchronization
Achieves nanosecond-level time synchronization through SyncE + PTP, supporting G.8275.1 compliance and BMC algorithm for optimal clock source selection.
Comprehensive OAM Capabilities
Hardware coprocessor-enabled detection protocols provide millisecond-level accuracy for network quality monitoring across 10GE, 25GE, 50GE, and 100GE links.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hubei Mailian International Trade Co., Ltd.
Location
Office T1, Rongke Luoyu Center, No. 95 Luoyu Road, Luonan Subdistrict, Hongshan District, Wuhan City, Hubei Province
Contact Person
Helen