Copper-Nickel Composite Strip — Low MOQ, Start with Samples
This copper-nickel composite strip starts with a low MOQ and samples — copper core for low electrical resistance, nickel cladding for weldability and corrosion protection, custom per drawing. No grade designation applies; the construction is the specification. Produced on our own nickel-alloy line, every coil is inspected per batch before packaging.
| Parameter | Value | Note |
|---|---|---|
| Construction | Copper core, nickel cladding | single or double-side, per drawing |
| Clad ratio | Per drawing | confirmed at order |
| Thickness | Per drawing | core + cladding layers |
| Width / length | Per drawing | strip form, per order |
| Tolerances | Per drawing | locked at order confirmation |
Low MOQ to start; samples and small batches available before series production.
- Low MOQ — start with a small order or samples, scale once the strip is qualified.
- Dual-metal benefit — copper core for low resistance, nickel cladding for weldability and corrosion protection.
- Custom per drawing — clad ratio, thickness, width and length confirmed at order.
- Weld-friendly surface — clean, oxide-free nickel cladding for consistent welds.
- Verified at every size — per-batch inspection from sample to series production.
Samples and small-batch orders are available before series production, so you can verify construction, weld behaviour and dimensions against your process. Once qualified, the same specification and the same inspection standard carry into production volume.
| Layer | Role |
|---|---|
| Copper core | Low electrical resistance, current carrying |
| Nickel cladding | Corrosion resistance, weldable surface |
| Clad ratio | Confirmed per drawing |
Produced on our own nickel-alloy line, every coil of composite strip passes dimensional, layer and surface inspection in our in-house inspection process before packaging. Construction is checked against the drawing per batch, so the strip you qualify on the sample matches the strip in the production run.
| Item | Scope |
|---|---|
| Per-batch inspection | Dimensions, layers, surface against the drawing |
| ISO9001 | Quality management system, plant-wide |
| EN 10204 3.1 MTC | Available with shipment on request |
| Traceability | Batch records for every delivery |
Strip is packaged for export with edge and surface protection. Lead time is 7-15 days, and shipping documents and inspection records accompany every delivery.
This composite carries no grade designation and is quoted per drawing, based on construction (single or double-side cladding), clad ratio, dimensions and quantity. No indicative price range is published for this product — request a quotation with your drawing for a firm price.
| Core material | Copper |
| Cladding material | Nickel |
| Cladding | Single or double-side, per drawing |
| Clad ratio | Per drawing |
| Composition record | Per-batch inspection per drawing |
Physical properties (density, electrical conductivity, tensile strength) depend on the core/clad ratio and layer thickness. Values are confirmed per drawing — no catalogue values are claimed for this composite.
| Form | Composite strip (Cu core, Ni cladding) |
| Grade | None (construction per drawing) |
| Size | Per drawing |
| Surface | Clean, oxide-free per drawing |
| Lead time | 7-15 days |
| Packaging | Export packaging per order |
- Per-batch inspection against the drawing (dimensions, layers, surface)
- Traceability records for every batch
- EN 10204 3.1 material test certificate available on request
- ISO9001 quality-system control across production
| Dimensional tolerances | Per drawing |
| Nickel cladding family (where applicable) | ASTM B162 (Ni200/Ni201 strip); GB/T 2072-2020 (N4/N6 strip) |
| Composite verification | Per drawing, per-batch inspection |
Strip is packaged for export with edge and surface protection. Lead time: 7-15 days. Shipping documents and inspection records accompany every shipment.
Changzhou DLX Alloy Co., Ltd. runs a 12,000 m² nickel-only plant rated at 1,200 tonnes per year — the same line that has drawn, formed and inspected alloy strip since 2002. Composite strip is built on that base: construction confirmed per drawing, clad ratio locked at order, per-batch inspection before packaging, and ISO9001 quality control with SGS support throughout. Low MOQ and samples let you qualify the material without committing volume.
A: MOQ is kept small to start, confirmed per drawing. Samples and small-batch orders are available before series production.
A: No — no grade designation applies. The specification is the construction: copper core, nickel cladding, clad ratio and dimensions, all per drawing.
A: Construction (single or double-side cladding), clad ratio, thickness, width, length and surface finish, all per drawing.
A: Per-batch inspection against the drawing in our in-house inspection process, with EN 10204 3.1 documentation on request.
A: Lead time is 7-15 days with export packaging; samples ship at the customer's cost.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.