Roofing Sheet Roll and Glazed Tile Roll Forming Machines

Machine Configurations 

1:7 Tons Manual Decoiler*3---For three machines. 

2:Blade:3 Set (Cr12 MOV)---For three machines. 

3:Hydraulic Pump:4 kw*3---Per machine with 4kw hydraulic pump for cutting. 

4:Transmission by 5.5kw Motor*3---Each machine with 5.5kw motor. 

5:The base is 400H steel. 

6:The wall plate thickness is 16mm. 

7:Diameter of the shaft is 75mm. 

8:Number of roller stations is 13(machine 1); 

   Number of roller stations is 12(machine 2); 

   Number of roller stations is 14(machine 3); 

9: Touch Screen-Delta,Inverter-Delta Brand,Electrical components-Schneider,PLC-Delta.

10:Working flow as the following:Decoiler+roll forming+cutting+product. 

11:Cutting length tolerance:±1mm. 

12:Voltage:380V 50HZ 3PH(Please confirm the voltage of each machine before production).

13:Working speed:0-25m/min(machine 1);0-5m/min(machine 2&machine 3) 

14:3 meters run out of table*3---For three machines. 

15:Working thickness:0.3-0.7mm,raw material width is 1000mm 

Machine Photos(Reference for you)