Antifouling Elastomer Pellets Permanent Antistatic Agent In Polymer Industrial Grade
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Brand:
HAISO ASTPEEN
Product Description
Permanent Antistatic Agent for Polymers - ASTPEEN 301
White/pale yellow translucent elastomer pellets featuring low surface resistance and easy color matching. Surface resistance ≤ 10⁷ Ω, hardness 63D, melting point 190℃.
Product Applications
Recommended for heat-resistant products including PA, PC, PPO, PPS, PEEK and LCP. Can be directly blended for injection molding or extrusion; also suitable for film blowing of PP and HDPE (pelletizing required) and transparent ABS materials. Widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields.
Technical Specifications
| Test Item | Unit | Test Method | Test Value |
|---|---|---|---|
| Tensile Strength at 25℃ | MPa | GB/T 528 | 61.8 |
| Elongation at Break at 25℃ | % | GB/T 528 | 768 |
| Shore Hardness, 3s | HD | GB/T 2411 | 62.5 |
| Density | g/cm³ | GB/T 533 | 1.163 |
| Melt Flow Rate (220℃, 2.16kg) | g/10min | GB-3682 | 15.4 |
| Surface Resistance | Ω | GB/T 1410 | 2.4*10⁷ |
Recommended Dosage
Generally recommended to add directly to the material at a ratio of 10-25%. The optimal dosage should be determined experimentally based on the target surface resistivity and the type of material used.
Instructions for Use
- Blend ASTPEEN permanent polymeric antistatic agent with the base resin thoroughly by dry mixing
- Add dispersants, fillers, pigments, etc., to the mixture as required
- Melt and compound using a twin-screw extruder to process into masterbatch
- Special masterbatch available (can be directly used in production after uniform dry mixing with raw materials at ratio of 1:1, 1:2 or 1:3)
- Compatible with conventional processing methods: open mixing/internal mixing, extrusion, injection moulding, blow moulding, cast film extrusion, foaming
- Suitable compatibiliser may be added as required
- Pre-drying recommended before processing (85-125℃ for 2-4 hours) to prevent performance loss
Precautions
- Use product as soon as possible after opening
- Store unused product in sealed container to prevent moisture absorption
- Bulk products with vacuum bag leakage and residual materials must be dried at 85-125℃ for 2-4 hours before use
- Moisture absorption may result in degraded performance during processing
Safety and Environmental Protection
- All raw materials are polymeric compounds with eco-friendly production process
- No waste gas, waste water or industrial residue generated
- Non-toxic granular solid - general protective equipment recommended (gloves, dust masks)
- In case of accidental contact with eyes or skin, rinse immediately with plenty of water
- Seek medical attention promptly if discomfort occurs
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
HAISO TECHNOLOGY CO., LTD
Location
19F, Building A21, Bio-Innovation Park, 666 Gaoxin Ave, East Lake Hi-Tech Zone, Wuhan, Hubei
Contact Person
peng