Customized Static Control Anti Static Agents Chemicals High Efficiency For Industrial Use
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Brand:
HAISO ASTPEEN
Product Description
Permanent Antistatic Agent for Polymers ASTPEEN 600
White/pale yellow elastomer particles featuring low surface resistance and easy color matching. Surface resistance ≤10⁶ Ω, hardness ~95A, melting point ~200°C.
Recommended Applications
Recommended for modification of HIPS, ABS, TPEE, PC, PBT, PP and other materials, as well as injection molding and extrusion of sheets (pelletizing required).
Product Specifications
| Test Item | Unit | Test Method | Test Value |
|---|---|---|---|
| Tensile Strength at 25℃ | MPa | GB/T 528 | 12.2 |
| Elongation at Break at 25℃ | % | GB/T 528 | 788 |
| Shore Hardness, 3s | HD | GB/T 2411 | 46.5 |
| Density | g/cm³ | GB/T 533 | 1.222 |
| Melt Flow Rate (210℃, 2.16kg) | g/10min | GB-3682 | 10.62 |
| Surface Resistance | Ω | GB/T 1410 | 1.6*10⁶ |
Recommended Dosage
It is generally recommended to add directly to the material at a ratio of 10-25%. The optimal dosage shall be determined experimentally based on the target surface resistivity and the type of material used.
Instructions for Use
- Blend ASTPEEN permanent polymeric antistatic agent with the base resin thoroughly by dry mixing
- Add dispersants, fillers, pigments, etc., to the mixture as required
- Melt and compound using a twin-screw extruder to process into masterbatch
- Special masterbatch available (can be directly used in production after uniform dry mixing with raw materials at ratio of 1:1, 1:2 or 1:3)
- Any conventional processing methods can be applied: open mixing/internal mixing, extrusion, injection moulding, blow moulding, cast film extrusion, foaming, etc.
- A suitable compatibiliser may be added as required
- Before processing, pre-drying of the mixture is recommended (suggested conditions: drying at 85-125℃ for 2-4 hours) to prevent performance loss
Precautions
- Use up the product as soon as possible after opening
- Any unused product must be stored in a sealed container to prevent moisture absorption
- Bulk products with vacuum bag leakage and residual materials must be dried at 85-125℃ for 2-4 hours before use
- Moisture absorption may result in degraded performance during processing
Applications
This product is widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
HAISO TECHNOLOGY CO., LTD
Location
19F, Building A21, Bio-Innovation Park, 666 Gaoxin Ave, East Lake Hi-Tech Zone, Wuhan, Hubei
Contact Person
peng