Industrial Permanent Antistatic Agent Granules Injection Molding Grade Anti Aging
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Brand:
HAISO ASTPEEN
Product Description
Permanent Antistatic Agent for Polymers ASTPEEN 800
Features low surface resistance and easy colour matching. Widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields.
Product Specifications
| Test Item | Unit | Test Method | Test Value |
|---|---|---|---|
| Tensile Strength at 25℃ | MPa | GB/T 528 | 7.3 |
| Elongation at Break at 25℃ | % | GB/T 528 | 1322 |
| Shore Hardness, 3s | HD | GB/T 2411 | 25 |
| Density | g/cm³ | GB/T 533 | 1.241 |
| Melt Flow Rate (200℃, 2.16kg) | g/10min | GB- 3682 | 27 |
| Surface Resistance | Ω | GB/T 1410 | 1.5*10⁶ |
Key Performance Characteristics
- Surface resistance ≤ 10⁶ Ω
- Hardness: 70A
- Melting point: ~150/170℃
- Recommended for transparent materials including TPU, PVC, TPE, ABS, POE, SBS, ASA and PP
Recommended Dosage
It is generally recommended to add directly to the material at a ratio of 10-25%. The optimal dosage shall be determined experimentally based on the target surface resistivity and the type of material used.
Instructions for Use
- Blend ASTPEEN permanent polymeric antistatic agent with the base resin thoroughly by dry mixing
- Add dispersants, fillers, pigments, etc., to the mixture as required
- Melt and compound using a twin-screw extruder to process into masterbatch
- Any conventional processing methods can be applied: open mixing/internal mixing, extrusion, injection moulding, blow moulding, cast film extrusion, foaming, etc.
- A suitable compatibiliser may be added as required
Special Masterbatch Option
We can provide special masterbatch, which can be directly used in production after uniform dry mixing with raw materials at a ratio of 1:1, 1:2 or 1:3.
Processing Guidelines
Before processing, pre-drying of the mixture is recommended as needed (suggested conditions: drying at 85-125℃ for 2-4 hours) to prevent performance loss during processing.
Storage & Handling
- Use up the product as soon as possible after opening
- Any unused product must be stored in a sealed container to prevent moisture absorption
- Bulk products with vacuum bag leakage caused by transportation or transfer must be dried at 85-125℃ for 2-4 hours before use
- Residual materials after opening and complimentary samples must be dried before use to prevent moisture absorption and degraded performance
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
HAISO TECHNOLOGY CO., LTD
Location
19F, Building A21, Bio-Innovation Park, 666 Gaoxin Ave, East Lake Hi-Tech Zone, Wuhan, Hubei
Contact Person
peng