Permanent Static Control Polymer Antistatic Agent Injection Grade For Industrial
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Brand:
HAISO ASTPEEN
Product Description
Permanent Antistatic Agent For Polymers ASTPEEN 8800 Series
White elastomer pellets with surface resistance ≤ 10¹⁰ Ω, hardness 95A, and melting point ~180°C. Recommended for transparent materials including GPPS (8801), ABS (8802), PMMA (8805), PC/PET (8808), PP/PE (8818) and other transparent grades. Widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other applications.
Recommended Dosage
Direct addition to material at 10-25% ratio. Optimal dosage should be determined experimentally based on target surface resistivity and material type.
Instructions for Use
- Thoroughly blend ASTPEEN permanent polymeric antistatic agent with base resin by dry mixing
- Add dispersants, fillers, pigments, etc., as required
- Melt and compound using twin-screw extruder to process into masterbatch
- Special masterbatch available (can be directly used after uniform dry mixing with raw materials at 1:1, 1:2 or 1:3 ratio)
- Compatible with conventional processing methods: open mixing/internal mixing, extrusion, injection moulding, blow moulding, cast film extrusion, foaming
- Suitable compatibiliser may be added as required (consult for specific products)
- Pre-drying recommended before processing: 85-125℃ for 2-4 hours to prevent performance loss
Precautions
- Use product as soon as possible after opening
- Store unused product in sealed container to prevent moisture absorption
- Bulk products with vacuum bag leakage and residual materials must be dried at 85-125℃ for 2-4 hours before use
- Moisture absorption may result in degraded performance during processing
Packaging and Storage
- Packaging: 25 kg per bag, paper-plastic composite bag or aluminium-plastic vacuum bag
- Storage: Cool, dry, ventilated warehouse away from direct sunlight, heat sources and ignition sources
Safety and Environmental Protection
- All raw materials are polymeric compounds with eco-friendly production process
- No waste gas, waste water or industrial residue generated
- Non-toxic granular solid
- General protective equipment recommended (gloves, dust masks) during handling
- In case of accidental contact with eyes or skin: rinse immediately with plenty of water and seek medical attention if discomfort occurs
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
HAISO TECHNOLOGY CO., LTD
Location
19F, Building A21, Bio-Innovation Park, 666 Gaoxin Ave, East Lake Hi-Tech Zone, Wuhan, Hubei
Contact Person
peng