Custom Permanent Antistatic Agent Granular Industrial Grade For Sensitive Electronics
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Brand:
HAISO ASTPEEN
Product Description
Permanent Antistatic Agent For Polymers Astpeen 313
This product is widely used in plastic modification, industrial tools, electronics industry, cleanroom equipment and other fields.
Recommended Dosage
It is generally recommended to add directly to the material at a ratio of 10-25%. The optimal dosage shall be determined experimentally based on the target surface resistivity and the type of material used.
Instructions for Use
- Blend ASTPEEN permanent polymeric antistatic agent with the base resin thoroughly by dry mixing
- Add dispersants, fillers, pigments, etc., to the mixture as required
- Melt and compound using a twin-screw extruder to process into masterbatch
- Any conventional processing methods can be applied, such as open mixing / internal mixing, extrusion, injection moulding, blow moulding, cast film extrusion, foaming, etc.
- A suitable compatibiliser may be added as required (please consult us for specific products)
- Before processing, pre-drying of the mixture is recommended as needed (suggested conditions: drying at 85-125℃ for 2-4 hours) to prevent performance loss during processing
Special masterbatch is available upon request, which can be directly used in production after uniform dry mixing with raw materials at a ratio of 1:1, 1:2 or 1:3.
Precautions
- Use up the product as soon as possible after opening
- Any unused product must be stored in a sealed container to prevent moisture absorption
- Bulk products with vacuum bag leakage caused by transportation or transfer, as well as residual materials after opening and complimentary samples, must be dried at 85-125℃ for 2-4 hours before use
Otherwise, moisture absorption from air may result in degraded performance during subsequent processing.
Packaging and Storage
| Packaging | 25 kg per bag, paper-plastic composite bag or aluminium-plastic vacuum bag |
| Storage | Store in a cool, dry and ventilated warehouse, away from direct sunlight, heat sources and ignition sources |
Safety and Environmental Protection
- All raw materials are polymeric compounds with an eco-friendly production process and no waste gas, waste water or industrial residue
- This product is non-toxic granular solid
- General protective equipment (e.g. gloves, dust masks) is recommended during handling
- In case of accidental contact with eyes or skin, rinse immediately with plenty of water
- Seek medical attention promptly if discomfort occurs
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
HAISO TECHNOLOGY CO., LTD
Location
19F, Building A21, Bio-Innovation Park, 666 Gaoxin Ave, East Lake Hi-Tech Zone, Wuhan, Hubei
Contact Person
peng