A: A “Perimeter Satin Border" means a frosted/satin-finished decorative border around the mirror edge — not metal or plastic, but a treated glass surface. When the LEDs turn on, light emits evenly through this satin border, creating a soft, premium halo effect. Unlike frameless mirrors that expose bare LEDs or rely on backlight, the satin border hides the light source while reducing glare and adding elegance to your bathroom.

A: Yes. This mirror uses a full-perimeter LED strip + light guide plate technology, delivering uniform light with no dark spots or hotspots. Typical brightness reaches 1000–1500+ lumens with CRI ≥85 — sufficient as a bathroom main light. For makeup, stand about 40–60 cm away; your face receives even, shadow-minimizing illumination.

A: Quite the opposite. The satin glass surface is fingerprint-resistant and stain-resistant — water spots and smudges are less visible than on glossy borders. Clean with a soft cloth and mild detergent. Avoid abrasive cleaners or hard brushes to preserve the satin texture. Seamless integration with the mirror means no dirt-trapping gaps.

A: The standard version may not include a defogger, but most manufacturers offer an optional defogging film. If you need anti-fog, check product details for “with Demister/Defogger" or ask customer service. Without it, the mirror will fog after a hot shower (wipe required). We recommend choosing a defogger-equipped version for high-humidity bathrooms.

A: Depends on the model. Basic versions are fixed brightness and fixed color temperature (e.g., 6000K cool white). Mid-to-high-end models support stepless dimming, and some even offer 3-color tuning (3000K/4500K/6500K). Check the spec sheet for “Dimmable" or “CCT Tunable" before purchase. For dimming, choose a title that explicitly includes those keywords.

A: Yes, a pre-wired power cord or 86-type junction box is needed. The mirror is wall-mounted with hanging slots. In small-to-medium bathrooms (4–8 sqm / 43–86 sq ft), the perimeter LED can fully replace the traditional ceiling light. However, we still recommend keeping an auxiliary ceiling light for overall illumination or using a wall switch that controls the mirror directly.