ASTM A240 304 Brushed Stainless Steel Sheet 1.5mm × 1219mm × 2438mm No.4 Finish
ASTM A240 304 Brushed Stainless Steel Sheet 1.5mm × 1219mm × 2438mm No.4 Finish is a cold rolled stainless steel sheet supplied in 304 / UNS S30400 grade to ASTM A240 requirements. This specific sheet is manufactured with a 1.5mm thickness, 1219mm width, and 2438mm length, providing a standard size for fabrication, architectural finishing, and industrial applications.
| Item | Specification |
|---|---|
| Product | 304 Brushed Stainless Steel Sheet |
| Standard | ASTM A240 |
| Grade | 304 |
| UNS | S30400 |
| EN Grade | 1.4301 |
| Material | Austenitic Stainless Steel |
| Thickness | 1.5mm |
| Width | 1219mm |
| Length | 2438mm |
| Surface Finish | No.4 Brushed |
| Production | Cold Rolled |
| Edge | Mill Edge / Slit Edge |
| Cutting | Cut-to-Size Available |
| Inspection | Mill Test Certificate Available |
Products Description
The 304 stainless steel material offers a practical combination of corrosion resistance, formability, weldability, and surface appearance, making this brushed sheet suitable for both decorative and functional applications. It can be used for elevator panels, wall cladding, kitchen equipment, machine covers, architectural components, furniture panels, and other fabricated parts.
For project requirements that differ from the standard 1.5mm × 1219mm × 2438mm size, custom cutting and cut-to-size service are available. PVC protective film can also be provided to help protect the No.4 brushed surface during processing, handling, transportation, and installation.
Chemical Composition of 304 Stainless Steel
| Element | ASTM A240 304 (%) |
|---|---|
| C | ≤0.07 |
| Si | ≤1.00 |
| Mn | ≤2.00 |
| P | ≤0.045 |
| S | ≤0.030 |
| Cr | 17.5–19.5 |
| Ni | 8.0–10.5 |
| N | ≤0.10 |
| Fe | Balance |
| Property | ASTM A240 304 |
|---|---|
| Tensile Strength | ≥515 MPa |
| Yield Strength | ≥205 MPa |
| Elongation | ≥40% |
| Hardness | ≤201 HB |
No.4 brushed finish is a commonly used stainless steel surface finish produced by abrasive grinding to create a consistent, directional satin texture. On 304 brushed stainless steel sheet, the No.4 finish provides a uniform appearance with a controlled linear grain pattern rather than the smooth reflective surface of a 2B finish.
For architectural and fabricated products, No.4 brushed stainless steel offers a balance of appearance, durability, cleanability, and practical surface performance. It is commonly selected for elevator panels, kitchen equipment, wall cladding, furniture components, and decorative metalwork.
The surface direction and appearance can vary slightly depending on the abrasive process and production conditions. For projects requiring consistent appearance across multiple sheets, surface inspection and finish matching are recommended before bulk production.
No.4 vs 2B Stainless Steel Finish
| Feature | No.4 Brushed | 2B |
|---|---|---|
| Appearance | Directional satin grain | Smooth, semi-reflective |
| Surface Texture | Visible brushed lines | Relatively smooth |
| Decorative Appeal | High | Moderate |
| Common Uses | Architectural & decorative | General fabrication |
| Surface Maintenance | Easy to clean | Easy to clean |
This ASTM A240 304 brushed stainless steel sheet is supplied in the specified 1.5mm × 1219mm × 2438mm size with a No.4 brushed finish. The 1219mm × 2438mm format is suitable for applications where standard sheet dimensions are preferred for fabrication and material planning.
Standard Product Size
| Item | Specification |
|---|---|
| Grade | 304 / UNS S30400 |
| Standard | ASTM A240 |
| Thickness | 1.5mm |
| Width | 1219mm |
| Length | 2438mm |
| Surface | No.4 Brushed |
| Production | Cold Rolled |
| Cutting | Cut-to-Size Available |
| Protection | PVC Film Available |
The theoretical weight of a 1.5mm × 1219mm × 2438mm 304 stainless steel sheet can be estimated using a density of approximately 7.93 g/cm³.
Calculation:
1.5 × 1219 × 2438 × 7.93 ÷ 1,000,000 ≈ 35.3 kg/sheet
Therefore, one sheet of ASTM A240 304 stainless steel, 1.5mm × 1219mm × 2438mm has a theoretical weight of approximately 35.3 kg.
| Specification | Approx. Weight |
|---|---|
| 1.5 × 1219 × 2438mm | 35.3 kg/sheet |
| 1 m² at 1.5mm thickness | 11.90 kg/m² |
The combination of 304 stainless steel and No.4 brushed finish makes this sheet suitable for applications requiring both functional corrosion resistance and a uniform decorative surface.
Architectural Applications
- Elevator doors and panels
- Wall cladding
- Interior wall panels
- Column covers
- Ceiling and trim components
- Architectural metalwork
Kitchen & Food Equipment
- Commercial kitchen equipment
- Worktables
- Countertops
- Sinks and splashbacks
- Food processing equipment
- Storage equipment
Industrial Applications
- Machine covers
- Equipment panels
- Fabricated components
- Enclosures
- Industrial work surfaces
- Processing equipment
Decorative Applications
- Furniture panels
- Display fixtures
- Retail interiors
- Decorative panels
- Interior trim
- Custom metal fabrication
When selecting brushed stainless steel sheet, grade and surface finish should be considered separately. No.4 describes the surface appearance, while 304, 316L, and 430 describe different stainless steel grades.
304 vs 316L Brushed Stainless Steel Sheet
304 is widely used for general architectural, kitchen, fabrication, and industrial applications. 316L contains molybdenum and generally provides better resistance to chloride-related corrosion, making it more suitable for marine, coastal, chemical, and other demanding environments.
For general-purpose applications where extreme chloride resistance is not required, 304 No.4 brushed stainless steel sheet can provide a practical combination of performance and cost.
304 vs 430 Brushed Stainless Steel Sheet
304 is an austenitic stainless steel, while 430 is a ferritic stainless steel. 304 generally offers better corrosion resistance and forming performance, while 430 is often selected for applications where cost, magnetic properties, and moderate corrosion resistance are important.
| Feature | 304 | 316L | 430 |
|---|---|---|---|
| Stainless Type | Austenitic | Austenitic | Ferritic |
| General Corrosion Resistance | Excellent | Excellent | Good |
| Chloride Resistance | Good | Better | Moderate |
| Formability | Excellent | Excellent | Good |
| Typical Use | General & architectural | Marine & chemical | Interior & appliance applications |
| No.4 Finish Available | Yes | Yes | Yes |
Our ASTM A240 304 Brushed Stainless Steel Sheet is supplied for customers requiring a defined grade, surface finish, and sheet size rather than generic stainless steel material.
Key Advantages
- ASTM A240 304 grade with material traceability
- UNS S30400 material identification
- 1.5mm × 1219mm × 2438mm standard product size
- Consistent No.4 brushed surface
- Cold rolled production
- Surface inspection before shipment
- PVC protective film available
- Cut-to-size service available
- Suitable for architectural and industrial fabrication
- Mill Test Certificate (MTC) available upon request
- Export seaworthy packing
- Support for both standard and bulk orders
For projects with specific dimensional, surface, testing, or packaging requirements, specifications can be confirmed before production or shipment.
Q1. What is ASTM A240 304 brushed stainless steel sheet?
A: It is a 304 / UNS S30400 stainless steel sheet manufactured to ASTM A240 requirements and supplied with a No.4 brushed surface finish. The brushed finish creates a directional satin appearance suitable for both decorative and functional applications.
Q2. What is the size of this 304 brushed stainless steel sheet?
A: The specified product size is 1.5mm thickness × 1219mm width × 2438mm length.
Q3. What does No.4 finish mean?
A: No.4 is a brushed stainless steel finish with a uniform directional satin grain. It is commonly used where a consistent decorative appearance is required.
Q4. Is 1.5mm 304 stainless steel sheet suitable for fabrication?
A: Yes. 304 stainless steel has good formability and weldability, making 1.5mm sheet suitable for many fabricated components, panels, kitchen equipment, and architectural applications.
Q5. How much does a 1.5mm × 1219mm × 2438mm 304 sheet weigh?
A: The theoretical weight is approximately 35.3 kg per sheet, based on a density of 7.93 g/cm³.
Q6. Can you provide custom sizes?
A: Yes. Cut-to-size 304 brushed stainless steel sheet can be supplied according to customer requirements, subject to available material dimensions and processing capabilities.
Q7. Can the No.4 surface be protected with PVC film?
A: Yes. PVC protective film can be applied to help protect the brushed surface from scratches and contamination during handling, cutting, transportation, and installation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.