Decription 

Material :

RAL .NO.

RAL 7035  RAL 9003  RAL9001  RAL7046  RAL5015  RAL3026  RAL1021  RAL6024

RAL1003   RAL1019  RAL2001  RAL2010  RAL3009  RAL5000  RAL5003  RAL7004

The setting process

1) Drill hole and select the correct nozzle

2) Open too and place stem  in tool ,Place rivet in the hole

3) Squeeze rivet gun once or twice until stem snaps ,Open rivet gun and turn upside down until stem falls out

PLEASE FOLLO INSTRUCTION TO ENSURE A PROFER FINISH

1) Unless fastening-tool can not go in,The riveting works must be conducted from the side where drilling has been made ,Which will prevent the flange (Rivet head ) from flashes due to drilling

2) When metallic materials are fastened with non metallic materials such as Plywook ,plastics or fabrics ,the riveting works must be conducted on the metallic side ,and in order to secure a rigid riveting ,Large flange rivets is recommended

3) When fastening with a thin material ,thinner than than 0.5mm ,the riveting must be done on the face of thin material