Non Magnetic Sand Control Wedge Wire Screen Pipe
Non-Magnetic Stainless Steel Water Wire Wound Screen For Sand Control
Stainless steel non-magnetic water wire wound screen product introduction:
Stainless steel non-magnetic water wire wound screen, also known as the filter water pipe, is widely used in oil, gas, well sand control industry, especially in the well industry prominent position, widely used in water resources filter screen.Stainless steel screen using the full welding production process, the application of special trapezoidal wire winding in the circular arrangement of a group of support wire welding system.
Stainless steel non-magnetic water wire wound screen characteristics:
1. The application of trapezoidal filaments makes V-shaped openings form between the cracks of the screen tubes.
2. The trapezoidal wire continuous winding forms a continuous high density uniform gap on the support wire arranged in a circular pattern.
3. The wrapping wire and all the supporting wire are connected by electric welding, strong and durable, and the working life cycle is long.
4. According to the actual needs of the design of supporting wire longitudinal arrangement and screen tube continuous gap form, so that the stainless steel screen high compressive performance.
5. The advantages of stainless steel screen improve the efficiency and life of the well.
Wedge-shaped wire-wound screen parameters:
1. Gap (mm) : 0.10, 0.15, 0.2, 0.25, 0.30, 0.50, 0.70,0.85,1.0,2.0 etc.
2. Open area up to 80%.
3. Material: low carbon steel, low carbon steel galvanized, plastic spray, stainless steel (304,316, etc.)
4. The length is 6 meters
5. External diameter from 25mm to 1300mm
6. Connection type: Welded rings or male/female threaded.
Regular Specification:
| Name: Johnson screen,Water wire screen,Water well screen, Wire warp screen,Wedge wire screen, Screen tube,Slotted tube,Wound screen,Continuous slot screen filter,Sand control screen, Wedge wire screen pipe, Rotary filter drum,Oil screen. | |||||||
| Material: Stainless steel 304,316L,Non-magnetic Stainless steel, Low carbon galvanized,904L, Duplex steel etc. | |||||||
| Diameter: From 29-1300mm (Normal diameter is in the below table) | |||||||
| Slot: From 0.1-100mm (Normal slot 0.5mm, 0.63mm, 0.75mm, 1.0mm, 1.5mm, Pls refer to below table) | |||||||
| Length: From 100-6000mm (Normal length is 2.9m and 5.8m, to fit container) | |||||||
| Wrap wire:2*3.5mm,2.2*3.5mm,2.2*4.5mm,3*4.6mm,3*5mm,3*6mm,3*6.5mm,3.2*6mm 4*7mm etc. | |||||||
| Support rod:ø3.0-ø6.0mm round wire, Also can be Vee-shaped wire. | |||||||
| Ends:Welded rings/Plain beveled ends,Male/female threaded,Flange etc. | |||||||
| Use:Water Well,Waste Water Treatment,Water supply systems,Coal & Mine,Food Processors & Beverage Screens,Environmental protection,Refining & Petrochemical, Architecture & Construction etc. | |||||||
| Sizes (inch) | OD (mm) | Slot (mm) | Length (m) | Tenslie Strength | Collapse Strength | Wrap wire Vee-shaped wire(mm) | Support rod Round wire(mm) |
| 3-1/2 | 88.9 | 1.0 | 2.9 | ＞22 | 10.2 | 2.2*3.5 (Width*height) | ø3.8MM×22 |
| 4-1/2 | 114.3 | 1.0 | 2.9 | ＞28 | 11.5 | 2.2*3.5(Width*height) | ø3.8MM×22 |
| 6-5/8 | 168.3 | 0.75 | 5.8 | ＞40 | 12.8 | 2.2*3.5(Width*height) | ø3.8MM×32 |
| 6-5/8 | 168.3 | 1.0 | 5.8 | ＞33 | 12.8 | 2.2*3.5(Width*height) | ø3.8MM×32 |
| 6-5/8 | 168.3 | 0.63 | 5.8 | ＞83 | 45 | 3.2*6.0(Width*height) | ø6.0MM×32 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞34 | 21.9 | 2.3*3.5(Width*height) | ø3.8MM×48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞50 | 38.2 | 3.0*5.0(Width*height) | ø4.0MM×48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞60 | 46 | 3.2*6.0(Width*height) | ø5.0MM×48 |
| 10-3/4 | 273.1 | 0.75 | 5.8 | ＞50 | 32.9 | 2.2*3.5(Width*height) | ø4.0MM×55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | ＞60 | 39.5 | 3.0*4.6(Width*height) | ø4.8MM×55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | ＞100 | 48 | 3.2*6.0(Width*height) | ø5.0MM×55 |
| 12-3/4 | 323.9 | 1.0 | 5.8 | ＞120 | 37.2 | 3.0*5.0(Width*height) | ø4.0MM×56 |
| 14 | 355.6 | 1.0 | 2.9 | ＞80 | 37.8 | 3.0*5.0(Width*height) | ø4.0MM×59 |
| 16 | 426 | 1.0 | 2.9 | ＞80 | 37.5 | 3.0*5.0(Width*height) | ø4.0MM×54 |
Pictures:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.