Welded Stainless Steel 304 Self Cleaning Wedge Wire Screen
Stainless Steel Wedge Wire Screen
Stainless Steel Wedge Wire Screen is produced through the method of electric resistance welding, wires with special profiles are welded to supporting wires at 90 degrees.
The distance between the surface profiles is controlled very accurately as it forms the slot through which the filtrate flows.The working surface is 100% smooth which eliminates blinding and pegging.
Wedge Wire is characteristic of accurate cut size and precise gap (aperture) required with the ability to carry heavy loads.
The direction of the flow is determined by the position of the surface profiles in relation to the support profiles.
Wedge wire screens are either flow-out-to-in OR flow-in-to-out.
Wedge Wire Screen Normal Sizes:
| Outside Diameter (mm) | Length (mm) | Slot (mm) | Type of end connection |
| 29,38,57,63,76,89,108, 150,168,320,600 etc | 500,1000,2000 etc
| 0.05,0.1,0.25,0.5,1.0 etc | Welded rings, male/female threaded coupling, flange,closed up and so on |
|
Explanation | Besides above of the specification screen pipe, we also can act according to the customer’s request. Diameter: ø25mm-ø1300mm. The length from the 100mm-6000mm. | ||
Application of wedge wire screen:
- Waste water treatment
- Petrochemical
- Coatings
- Mineral and aggregate processing
- Pulp and paper
- Chemical
- Solid-liquid separation
- Food and beverage
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.