3000 RPM 8 Bar Screw Compressor Parts 4.69 m3/min Oil Injected Screw Compressor Body
The Hanbell single‑stage oil‑injected screw compressor body utilizes a precision‑machined 5:6 asymmetrical rotor profile to reduce internal slip losses and enhance volumetric efficiency. The integrated oil injection system provides continuous rotor sealing, inter‑lobe cooling, and lubrication, enabling stable discharge temperatures under continuous full‑load operation. Its cast iron housing incorporates a split end‑cover design and oil separator access port, allowing fast rotor clearance checks and separator replacement without major teardown. With a typical design life exceeding 50,000 hours under rated conditions, the compressor body maintains stable specific power and low wear rates, suited for industrial air compression where energy efficiency and maintenance accessibility are critical.
| Parameters | Technical Value |
|---|---|
| Model | AB-420S-4 |
| Drive Speed (RPM) | 3000 |
| Discharge Pressure (Bar) | 8 |
| Free Air Delivery(m3/min) | 4.69 |
| Free Air Delivery (@s.t.p)(Nm3/min) | 4.37 |
| Mass Flow Rate(kg/min) | 5.60 |
| Shaft Power(KW) | 31.2 |
| Specific Power(KW) | 6.65 |
| Oil Flow Rate(L/min) | 44.4 |
| Oil Heat Load (kW) | 25.6 |
| Dew Point Temperature(°C) | 71.9 |
| Recommended Oil Viscosity | 46 |
Long service life, good stability,
High application pressure and has been used in the market for more than 15 years.
Good reputation and is benchmarked against the international brand head.
Bebaios is a premier high-tech enterprise where deep scientific research meets a passion for industrial excellence. While we are proud of our comprehensive lineup—ranging from screw to scroll models—our true pride lies in our corporate culture.We believe that employee well-being is the foundation of innovation. By fostering a healthy, balanced, and tech-forward work environment, our team pours unmatched craftsmanship into every unit. This "human-centric" approach ensures that Bebaios products aren't just built; they are perfected. With a digital ERP backbone for total part traceability and a 24/7 global support heart, we stand by your side as you build the future.
A:Depending on the production cycle, completion is expected within 2-3 days.
A:12 months.
A:1 set.
A:Approximately 6,000 units per month. Thank you.
A:Yes, we are also actively seeking agents in various countries.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.