High-Precision 5:6 Rotor Profile Screw Block 3000 RPM 8 Bar Discharge Pressure Compressor Component
The Hanbell single‑stage oil‑injected screw compressor body utilizes a precision‑machined 5:6 asymmetrical rotor profile to reduce internal slip losses and enhance volumetric efficiency. The integrated oil injection system provides continuous rotor sealing, inter‑lobe cooling, and lubrication, enabling stable discharge temperatures under continuous full‑load operation. Its cast iron housing incorporates a split end‑cover design and oil separator access port, allowing fast rotor clearance checks and separator replacement without major teardown. With a typical design life exceeding 50,000 hours under rated conditions, the compressor body maintains stable specific power and low wear rates, suited for industrial air compression where energy efficiency and maintenance accessibility are critical.
| Parameters | Technical Value |
|---|---|
| Model | AB-3300 |
| Drive Speed (RPM) | 3000 |
| Discharge Pressure (Bar) | 8 |
| Free Air Delivery(m3/min) | 50.30 |
| Free Air Delivery (@s.t.p)(Nm3/min) | 46.87 |
| Mass Flow Rate(kg/min) | 60.03 |
| Shaft Power(KW) | 315.6 |
| Specific Power(KW) | 6.27 |
| Oil Flow Rate(L/min) | 443.4 |
| Oil Heat Load (kW) | 255.3 |
| Dew Point Temperature(°C) | 71.9 |
| Recommended Oil Viscosity | 46 |
Long service life, good stability,
High application pressure and has been used in the market for more than 15 years.
Good reputation and is benchmarked against the international brand head
Bebaios, a leading high-end brand in the compressor and gas machinery industry. Our team fosters a harmonious atmosphere and cares about the physical and mental well-being of our employees. We focus on the global market and have a highly experienced R&D team with over 20 years experience. We prioritize technological innovation in air compressors, holding over 50 patents and achieving numerous scientific and technological breakthroughs. While innovating, we also emphasize user experience and have close collaborative projects with domestic universities and research institutions.
FAQsA:12 months.
A:Depending on the production cycle, completion is expected within 2-3 days.
A:1 set.
A:Approximately 6,000 units per month. Thank you.
A:Yes, we are also actively seeking agents in various countries.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.