150kVA Three Phase Pad Mount Transformer Loop Feed Dual Power Pole 30KV
Leilang Electric 150kVA three phase pad mounted transformer is professionally designed for North American utility, commercial, industrial and residential power distribution. This model supports Loop Feed & Radial Feed dual power supply architecture, enabling flexible grid connection, dual-power switching and ring-network operation to significantly improve power supply reliability and continuity. Built with fully sealed oil‑immersed structure and factory‑preassembled modular design, it supports 1‑day fast installation without on‑site assembly or complicated commissioning. All units comply with ANSI C57.12.34 and IEEE standards, carry UL/cUL certification, and deliver stable, safe, maintenance‑friendly performance for long‑term outdoor use.
- Loop Feed Dual Power Supply
- Supports loop feed & radial feed for grid flexibility
- Enables ring network & dual‑power automatic switching
- Improves power supply stability & reduces outage risk
- Widely used in utility distribution, commercial complexes, public facilities
- 1‑Day Fast Installation
- Fully factory pre‑assembled & pre‑tested
- Ready for pad mounting & cable connection
- Ground‑level operation, no climbing needed
- Greatly shortens project cycle & labor cost
- UL / ANSI / IEEE Certified Quality
- Full compliance with ANSI C57.12.34, IEEE standards
- UL/cUL listed for North American market
- Copper winding, low‑loss silicon steel core
- 65°C temperature rise, ONAN self‑cooled
- Fully Sealed & Maintenance‑Saving
- Hermetically sealed oil tank to prevent moisture & oxidation
- Pressure relief valve, oil gauge, drain & sampler as standard
- Low noise, corrosion‑resistant outdoor cabinet
- Long service life, minimal routine maintenance
| Brand | Leilang Electric |
| Type | Three Phase Pad Mounted Transformer |
| Rated Capacity | 150 kVA |
| Primary Voltage | 12870V (12.87kV) |
| Secondary Voltage | 208Y/120V |
| Frequency | 60 Hz |
| Vector Group | Dyn1 |
| Cooling | ONAN (Self‑Cooled) |
| Temperature Rise | 65°C |
| No‑Load Loss | 320 W |
| Load Loss | 2400 W |
| Impedance | 5.5–6.5% |
| Feed Type | Loop Feed / Radial Feed |
| Winding Material | Copper |
| Core | Grain‑Oriented Silicon Steel |
| Insulation Oil | Mineral Oil (Non‑PCB) |
| HV BIL | 95 kV |
| LV BIL | 30 kV |
| Operating Temp | -40°C ~ +40°C |
| Certifications | UL / cUL, CE, ISO, ANSI C57.12.34, IEEE |
| Warranty | 24 Months from B/L Date |
| MOQ | 1 Unit |
| Lead Time | 15–30 days |

Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.