Shielded KVVP 12 Core Control Cable 450/750V For Industrial Signal Transmission
| Component | Specification |
|---|---|
| Standard | KVVP: GB9330.2 | KVVP2: GB9330.2 | KVVP2-22: GB9330.3 | KVVP3: GB9330.3 |
| Conductor | Complies with GB/T3956 type 1 and type 2 stranded conductors |
| Insulation | Hard structure cable PVC/A type PVC insulation for fixed laying |
| Core Structure | Allows gap filling between core wires; cable package permits isolation layer (PP nonwoven fabric or band package) without blocking insulation core |
| Jacket | ST1 PVC sheath |
| Screen |
KVVP: Braided round copper wire or tinned round copper wire KVVP2: 0.05~0.10mm soft copper tape overlapping wrapping KVVP2-22: 0.05~0.10mm soft copper tape overlapping wrapping KVVP3: 0.05~0.10mm aluminum-plastic composite tape overlapping wrapping with drain wire ≥0.2mm² |
| Armored | KVVP2-22: 0.2mm thickness painted steel or galvanized steel armor meeting GB/T2952.1 requirements |
| Rated Voltage | U0/U 450/750V |
| Test Voltage | Insulation thickness ≤0.6mm: 2000V | Insulation thickness ≥0.6mm: 2500V | External test: 3000V |
| Minimum Bending Radius | Fixed laying: 12*D (outer diameter of cable) |
| Operating Temperature | Fixed laying: -10℃ to +70℃ | Mobile installation: -5°C to +70°C |
| Radiation Resistance | 8*10⁷ cJ/kg |
| Flame Retardancy | Passes GB/T18380 flame retardant test |
Designed for laying indoors, ducts, pipes, and other fixed shield case requirements. Used for signaling control, monitoring and protection circuit lines, electrical instruments, power distribution units, controlling applications and measurement systems. Applications include measurement testing, signal display, telemetry self-test, network computers, alarm systems and other control systems transmitting signals.
Suitable for laying indoors, ducts, pipes, and other fixed shield case requirements. Used for signaling control, monitoring and protection circuit lines, electrical instruments, power distribution units, controlling applications and measurement systems. Applications include measurement testing, signal display, telemetry self-test, network computers, alarm systems and other control systems transmitting signals.
Designed for chamber laying, ducts, pipes, and other fixed buried applications requiring shielding. Used for signaling control, monitoring and protection circuit lines, electrical instruments, power distribution units, controlling applications and measurement systems. Applications include measurement testing, signal display, telemetry self-test, network computers, alarm systems and other control systems transmitting signals.
Suitable for laying indoors, ducts, pipes, and other fixed shield case requirements. Used for signaling control, monitoring and protection circuit lines, electrical instruments, power distribution units, controlling applications and measurement systems. Applications include measurement testing, signal display, telemetry self-test, network computers, alarm systems and other control systems transmitting signals.
The control cable features copper cores with the following nominal cross-section configurations:
- 2.5mm² and below: 2 to 61 cores
- 4 to 6mm²: 2 to 14 cores
- 10mm²: 2 to 10 cores
Control cables used in computer systems typically utilize polyvinyl chloride, polyethylene, cross-linked polyethylene, and fluoroplastic insulation products.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.