MMGCEGCH Marine and Offshore Cable with 6/10kV Rating EPR Insulation and Copper Conductor for Industrial Use

For fixed installation on ships and offshore units in all locations and on open decks. The cables are not suitable for continuous use in water.

Conductor: Copper, round stranded according to IEC 60228 class 2 or class 5

Insulation: Ethylene-propylene rubber (EPR) according to IEC 60092-360

Electrical field control: Inner and outer layer of semiconductive rubber compound

Colour code: Numerical 1-2-3 imprint on the black outer semi-conductive layer

Individual screen: Copper wires wrapped in a traverse spiral and/or copper tapes

Inner covering: Polyolefin compound, black

Screen: Plain copper wire braid

Outer sheath: Polyolefin compound, type SHF-1, according to IEC 60092-360

Electrical: Rated voltage: 6/10 kV | Max. operating voltage AC: 12 kV | AC test voltage: 21 kV

Thermal: Max. conductor temperature: 90°C | Short circuit temperature: 250°C | Ambient temperature: -35°C | Laying temperature: -15°C

Mechanical: Max. tensile load: 50 N/mm² | Min. bending radius: 12 x D

Chemical: Compliant with IEC standards for smoke emission, acidity of fire gases, and flame propagation