Actuated Tool Installed Plastic Wall Insulation Anchors With Premounted Steel Nail

Actuated Tool Installed Plastic Insulation Wall Anchors With Premounted Steel Nail

Quik details of plastic insulation wall anchors

• washer base: 60mm round base washer with high hardness, wear-resistance and high toughness
• plastic wall anchor length: 20mm - 250mm in standard
• Quick and easy to install
• Up to 5 times quicker than conventional methods
• Time and cost savings for you
• anchor Material:HDPE
• Nail type:Steel drive pins
• Material Coating:Zinc plated
• installation with auto gun

Specification details of the plastic insulation wall anchors

Features

1.The diameter of the plastic plate is more than 50 mm; the effective anchoring depth ranges from 20 mm to 25 mm (adjustable according to actual working conditions).

2.The tensile strength of each single anchor is greater than 0.30 kN (standard value). Tested in accordance with JG149-2003,

3.its tensile strength fully meets conventional working requirements.

4.In accordance with JG149-2003, the additional heat transfer increase from each anchor to the system is less than 0.004 W/m²·K.

5.The hardness, bending degree, galvanized coating thickness and firing performance of the drive pin comply with the standard GB/T18981-2003.

6.Suitable for the installation and fastening of various insulation boards (EPS board, XPS board, rock wool board, polyurethane board, phenolic board, foam cement board, etc.) on C15-C50 base materials

Performance Parameters

About this supplier
Company Profile- anping county huihao wire mesh manufacture co.,ltd Huihao mainly produce: metal rings mesh, insulation fasteners, decoration metal mesh.
Huihao services include : pattern design frame design installation system design surface finished Mould customization