Explosion Proof Online Gas Monitoring System For Combustible Voc Toxic Oxygen
-
Equipped with a professional pretreatment system that effectively purifies the sample gas, ensuring that the gas entering the analyzer contains no impurities that could interfere with measurement, thereby guaranteeing measurement accuracy.
-
Utilizes internationally advanced sensors, giving the system a longer service life and stronger anti-interference capability, capable of monitoring multiple gases simultaneously to ensure data accuracy.
-
The built-in detector supports 4-20mA and RS485 output signals, and can be configured with DTU, display screen, etc., for data upload to the platform.
-
Built-in automatic heat dissipation system effectively extends the equipment's service life.
-
Available in standard and explosion-proof versions according to explosion-proof requirements.
>>Main technical parameters
| Detected Gases | Combustible gas, oxygen, flue gas, exhaust emissions, toxic and hazardous VOCs, etc. |
| Detection Principle | Electrochemical, infrared, PID photoionization (principle varies by gas); other gases support customization |
| Detection Method | Pump suction |
| Display Method | 7-inch LCD color screen |
| Display Units | ppm, mg/m³ |
| Measurement Range | 0–200 mg/m³ (optional; ranges not listed can be customized) |
| Resolution | 0.1 mg/m³ |
| Accuracy | ≤3% FS |
| Operation Method | Touch operation |
| Warm-up Time | ≤90 seconds |
| Response Time | T90 ≤90 seconds |
| Output Signal | GPRS, 4–20 mA, RS485 |
| Operating Humidity | ≤95% RH, non-condensing |
| Operating Temperature | -40°C ~ +60°C |
| Power Supply Voltage | AC220V, 50Hz ±1% |
| Operating Pressure | 86–106 kPa |
| Installation Method | Wall-mounted, pole-mounted |
| Protection Rating | IP54 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.