Highways Railways Uniaxial Geogrid 56KN/M Geocomposite Liner
RoadReinforcement tunnels railways Uniaxial High Strength Uniaxial Plastic Geogrid
Product Description
Uniaxial Plastic Geogrid is a three-dimensional grid geotechnical material with a certain height, has two-dimensional networking structure. It is made of polymer materials, such as polypropylene, polyvinyl chloride and other high molecular polymers.
Product Application
Widely used in dams, tunnels, docks, highways, railways, construction and other fields
Product Features
1. Strengthen the roadbed, effectively distribute the diffusion load, improve the stability and bearing capacity of the roadbed, extend the service life;
2. Can withstand greater alternating loads;
3. Prevent the deformation and cracking of the roadbed caused by the loss of roadbed materials;
4. Applicable to all kinds of soil, no need to take materials off-site, saving labor and time;
5. Simple and fast construction, can greatly reduce construction costs.
Unix ial Plastic Geogrid GB/T17689-2008
Technical Parameters of Polypropylene (PP) Uniaxial Plastic Geogrid
|
Specification |
Tensile Strength (KN/m) |
MD & CMD Tensile Strength at 2% Elongation (KN/m) |
MD & CMD Tensile Strength at 5% Elongation (KN/m) |
Nominal Elongation (%) |
|
TGDG3 5 |
≥35.0 |
≥ 10.0 |
≥22.0 |
≤ 10.0 |
|
TGDG5 0 |
≥ 50.0 |
≥ 12.0 |
≥28.0 |
|
|
TGDG80 |
≥80.0 |
≥26.0 |
≥48.0 |
|
|
TGDG120 |
≥ 120.0 |
≥36.0 |
≥72.0 |
|
|
TGDG16 0 |
≥ 160.0 |
≥45.0 |
≥90.0 |
|
|
TGDG200 |
≥200.0 |
≥ 56.0 |
≥ 112.0 |
HDPE UniaxialPlastic Geogrid
|
Specification |
Tensile Strength (KN/m) |
Tensile Strength at 2% Elongation (KN/m) |
Tensile Strength at 5% Elongation (KN/m) |
Nominal Elongation (%) |
|
TGDG3 5 |
≥35.0 |
≥7.5 |
≥21.5 |
≤ 11.5 |
|
TGDG5 0 |
≥ 50.0 |
≥ 12.0 |
≥23.0 |
|
|
TGDG80 |
≥80.0 |
≥21.0 |
≥40.0 |
|
|
TGDG120 |
≥ 120.0 |
≥33.0 |
≥65.0 |
|
|
TGDG16 0 |
≥ 160.0 |
≥47.0 |
≥93..0 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.