Front Roller Brake Hub Lock Mobility Vehicles OEM Bike Disc Lock With Alarm
Front Roller Brake Hub Lock For City Mobility Vehicles For OEM Projects
The Front Roller Brake Hub Lock is designed for city mobility vehicles and OEM front-wheel platforms that require smart front hub replacement with roller brake interface matching. Based on ZS3728, this page focuses on front-wheel security for projects where the front hub lock must match a roller brake layout.
ZS3728 combines front hub replacement, vehicle-side smart control and speed sensing in one front-wheel lock direction. It is especially relevant for shared mobility and city e-bike projects where front-wheel security, outdoor use and compact wheel integration are important.
Although the source backend category is Front Disc Lock, the parameter table lists Roller Brake Interface for this reference model. Upload content should keep both pieces of information accurate: use the original Product Category for the backend, and describe the brake interface as roller brake matching in the product content.
- Front Hub Replacement: Designed for front-wheel hub lock integration rather than rear-wheel or motor-side locking.
- Roller Brake Interface: Uses the ZS3728 roller brake interface direction according to source parameters.
- Smart Vehicle Control: Supports controller, IoT or battery-side integration according to source data.
- 4-Magnet Speed Sensing: Standard 4 magnets per ring support front wheel movement detection for vehicle-side logic.
- City Mobility Application: Suitable for shared mobility vehicles, city e-bikes and front-wheel security projects.
- IPX7 Complete Unit: Supports outdoor city vehicle use and wet operating environments.
ZS3728 works as a smart front hub lock replacement. The lock receives vehicle-side commands and performs lock or unlock operation through the integrated front hub lock structure, while the speed sensing solution provides wheel movement information to the vehicle system.
The main matching point is the front wheel platform. OEM teams should confirm front fork O.L.D., axle diameter, spoke specification, roller brake structure, controller protocol and speed protection logic before sampling.
This product page is suitable for city e-bikes, shared mobility vehicles, fleet bicycles and OEM front-wheel platforms that require a front hub lock with roller brake interface matching.
| Parameter | Specification |
|---|---|
| Product Name | Front Roller Brake Hub Lock |
| Model | ZS3728 |
| Product Category | Front Disc Lock |
| Mounting Position | Front Hub Replacement |
| Voltage | 5V DC / 48V DC |
| Communication | UART / RS485 / CAN |
| Power Source | Main Controller / IoT / Battery |
| Electronic Protection Speed | Defined According To Customer Requirements |
| Speed Sensing Solution | Standard 4 Magnets Per Ring, Evenly Distributed |
| Torque Resistance Test | >=160 N.m |
| Mechanical Safety Locking Speed | 30RPM, Actual Speed Related To Wheel Diameter |
| Spoke Specification | 36H13G / 36H12G |
| O.L.D. | 100 mm |
| Axle Hole | Without Through Axle Hole |
| Axle Diameter | 3/8" / M9 / M12 x 1.25 mm |
| Main Axle Load Strength | 300 kgf |
| Brake Parts | Brake Parts Not Included |
| Brake Interface | Roller Brake Interface |
| Operating Temperature | -20°C To 65°C |
| Waterproof Rating | IPX7 Complete Unit |
| High Temperature Storage | 80°C +/- 2°C For 48 Hours |
| Low Temperature Storage | -30°C +/- 2°C For 48 Hours |
| High Temperature And Humidity | 65°C, 95%RH, 48 Hours |
| Salt Spray Test | 72 Hours, Neutral |
| Certification | RoHS / REACH To Be Confirmed Against Final Compliance Documents |
Q: What is the reference model for this page?
A: The reference model is ZS3728.
Q: What Product Category should be used in the backend?
A: Use Front Disc Lock, because that is the source Product Category for ZS3728.
Q: What brake interface does ZS3728 use?
A: The source parameter table lists Roller Brake Interface.
Q: Where is it installed?
A: It is used as a front hub replacement.
Q: What should OEM customers confirm before sampling?
A: Confirm front fork O.L.D., axle diameter, spoke specification, roller brake layout, controller interface and speed sensing logic.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.