FRC 83mm Hub Motor 8NM Torque 83mm Hub Motor for Electric Skateboard
The best quality hub motor for electric skateboard designed by Jacob Bloy
The best material has been adapoted:
0.2mm thickness japan stator
N42SH high level magnet with rare earth material
Orginal Japan NSK ball bearing
Hall sensored board with temperature sensors
Single and dual can be adopted in each board.
Sina wave controller
4 wheel are in same size and totally same design and material.
MP 83mm wheel hub motor.
| Motor | MP 83 hub | Power | 3000W peak 1500w constant |
| Voltage | 8V - 50V | Current | 60A peak 30A constant |
| KV | 67kv-250kv | ESC | VESC4/VESC6 |
Motor specs:
60A peak 30a constant
50.4v peak
2200w peak
1000w continous
Our sina wave controller spec:
5V 1A output for external electronics from the buck converter integrated on the DRV8302.
Voltage: 8V - 60V (Safe for 3S to 12S LiPo).
Current: Up to 240A for a couple of seconds or about 50A continuous depending on the temperature and air circulation around the PCB.
Firmware based on ChibiOS/RT.
PCB size: slightly less than 40mm x 60mm.
Current and voltage measurement on all phases.
Regenerative braking.
DC motors are also supported.
Sensored or sensorless operation.
Our company introduction:
Dongguan Freerchobby Model Co., was established in 2012. We are an RC model manufacturer specializing in designing&producing RC car
model, brushless motor, rc tools and accessories.
Our main technician, Jerry Zhen, has much experience to design any kinds
of motor for electric skateboard, electric bike, electric paramotor, electric car&ship,
our sensored motor, watercooling system motors will be what you request,
such as our motor 8085, 80100, 12090, 120100, 154120 ect.
Welcome to visit the updates for our website.
Factory photos:
Certificate:
We can provide OEM, ODM serivice for any potential client and projects. Wish to hear from you.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.