Pipeline Vertical Gravity Fall Metal Separator Detection Equipment JZD-60-40
Pipeline Vertical Metal Separator JZD-60-40 is designed for detecting and removing metal impurities in pharmaceutical and industrial applications.
Mainly used for detecting metal impurities in pharmaceutical products including ferrous, non-ferrous, copper, aluminum, and other metal contaminants.
- Control Part: MEIDELE
- Electromagnetic Valve
- Air Cylinder: SMC
- Air Cylinder Filter: SMC
- Machine Material: Full stainless steel
- Working Voltage: 220V AC (±10%), 50/60Hz
- Input Current: 80/160mA
- Fuse: 2 pcs 315mA
- Working Environment: -10°C to 60°C
- Waterproof Standard: IP65
- Input Connector: Testing button, Hand separator, Reset
- Output Connector: Metal detector
- Air Compression: 2.5KG, 8mm soft tube connection
- Air Consumption: 0.4 liter per rejection action
- Rejection Time: 0.2-2.5 seconds
| Input Tube | Output | Detection Sensitivity (Fe/SUS) |
|---|---|---|
| 35MM | 300KG/HR | Fe: 0.5mm, SUS: 1mm |
This metal detector consists of metal detection and rejection sections, both controlled by the control box. The system operates using a high-frequency magnetic field. When metals pass through the sensor, they influence the magnetic field, triggering a signal to the rejection device.
While this machine provides optimal metal separation solutions, detection may not occur in the following cases:
- When detected materials have massive particles smaller than standard metal detection thresholds
- When multiple metals are detected simultaneously and the rejection device is not turned off
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.