KTL Single Cartridge Mechanical Seal for Slurry Paper Pulp FGD Pumps

KTL Single Cartridge Mechanical Seal for Slurry Paper Pulp FGD Pumps

KTL

For: Desulphurization pumps, Salt slurry pumps, Paper pulp pumps, Power plant FGD, Salt chemical engineering, Water treatment

Single end, multiple springs, balanced cartridge mechanical seal with independent rotary direction, still structure and clamp transmission. Springs protected by elastomers from medium to prevent jamming. Sleeve supported by elastomers on shaft with no axial movement or shaft damage. Guide sleeve structure for high cooling efficiency. Requires sealant at 0.01–0.1 MPa for natural flow (external flush mechanical seal). Conforms to ISO3069, DIN24960, GB6556 standards. Inner diameter range: 35–250 mm.

Materials

Rotary Face / Stationary Face / Elastomer / Spring / Metal Parts

SiC/TC (Rotary) / SiC/TC (Stationary) / FKM/Aflas/EPDM (Elastomers) / SS316/HC276 (Springs) / SS304/SS316L/2507/2205 (Metal Parts)

Pressure: 0 ~ 1.5 MPa

Temperature: -20 ~ 130 ºC

Linear Speed: 10 m/s or less

Mediums: Solid content no more than 30% such as gypsum slurry, salt slurry, paper pulp and sewage etc.

Customization Available: Changes of materials for getting other operating parameters are possible. Contact us with your requirements.

BESTSEAL — Your Reliable Partner for Mechanical Seals

• BESTSEAL Cartridge Mechanical Seals
• Custom Cartridge Mechanical Seals — From Drawing to Delivery in 15–20 Working Days