SANY 365H Engine Turbocharger Intake Rubber Hose, Part No.: SY365CDI3K.1.3.4-15, SANY Material No.: 13539143
Price:
Negotiable
MOQ:
1pcs
Delivery Time:
In Stock
Brand:
SANY
Product Description
SANY 365H Engine Turbocharger Intake Rubber Hose
(Part No.: SY365CDI3K.1.3.4-15 | Material No.: 13539143)
In Stock | Carton Packaging | Price Negotiable
1. Basic Information
Part Name: Turbocharger Intake Rubber Hose (Hot End / High Pressure Intake)
Applicable Models: SANY SY365H, SY375H Excavator
Part No.: SY365CDI3K.1.3.4-15
SANY Material No.: 13539143
Matching Engine: Isuzu 6HK1/4HK1 Electronic Injection Series (Original standard for SANY 365H)
Installation Position: Between turbocharger outlet and intercooler inlet, for delivering high-temperature and high-pressure boosted air.
2. Material & Structure
Main Material: Heat-resistant reinforced EPDM rubber with multi-layer aramid fabric (specially designed for high pressure and high temperature conditions).
- Inner layer: Heat resistance up to 180℃, oil-proof and impermeable, suitable for high-temperature compressed air from turbocharger outlet.
- Reinforcement layer: High-tensile fabric, resistant to pulsating pressure, bulging and bursting.
- Outer layer: Anti-aging, ozone-resistant and oil-proof against engine compartment contaminants to extend service life.
Structural Design:
- High-pressure curved section: Integrally formed with original molds, perfectly matched with engine compartment radian for interference-free installation.
- Reinforced thickened ends with sealing grooves, fits turbocharger and intercooler ports. Equipped with dedicated stainless steel clamps for excellent airtight performance.
- Flexible corrugated section: Absorbs turbocharger vibration and thermal expansion & contraction, relieves joint stress and prevents cracking.
3. Core Technical Parameters
Inner Diameter: φ110mm (Matched with intake flow of 6HK1 turbocharger)
Working Pressure: 0.2~0.35MPa (High-pressure boosting condition)
Burst Pressure: ≥1.2MPa (High safety margin)
Temperature Range: -40℃ ~ +180℃ (Short-term peak temperature up to 200℃)
Length: Approx. 580mm (Including straight sections and curved corrugated section at both ends)
Weight: Approx. 2.9kg
Color: Black (Original standard)
4. Functions
- Deliver high-temperature boosted air: Transports air over 150℃ compressed by turbocharger to the intercooler. The cooled air then flows into cylinders to improve air density and combustion efficiency.
- High-pressure sealing & leakage prevention: Stabilize the pressure of boosting system and avoid air leakage, so as to prevent sharp power drop, excessive fuel consumption and turbo pressure fault alarm.
- Vibration damping & thermal compensation: The flexible structure absorbs high-frequency vibration and thermal deformation of turbocharger, protects turbo shaft and intercooler joints, and reduces cracking risks caused by rigid connection.
- Thermal insulation: The heat-resistant inner layer isolates high temperature and prevents surrounding components in engine compartment from thermal aging.
5. Application & Replacement
Original Fit: SANY SY365H, SY375H equipped with Isuzu 6HK1 electronic injection engine.
Matching Part: It is a matched component with air filter to turbocharger hose (SY365CDI3K.1.3.4-13). Inspection and replacement in pairs are recommended.
Replacement Note: Material No. 13539143 is genuine SANY part with no universal substitutes. Original reinforced hose must be adopted under high temperature and high pressure to eliminate potential safety hazards.
6. Fault Impact & Replacement Recommendation
- Bulging / Cracking: Air leakage of boosting system leads to insufficient power, black smoke, higher fuel consumption and turbo pressure warning light on.
- Loose joints: Insufficient boosting pressure causes weak acceleration, poor climbing performance and turbo lag.
- Aging & hardening / Inner layer peeling: The hose is prone to fracture under vibration resulting in sudden engine stall. Foreign matters entering turbocharger will wear blades and even scrap the whole turbo with extremely high maintenance cost.
- Service Cycle: Inspect appearance and hardness every 2000 working hours. Replace immediately after 3000 working hours or once aging, bulging or cracks occur. It is suggested to replace it together with the air filter side intake hose to ensure the consistency of the whole intake system.
7. Packaging & After-sales Service
Packaging: Standard export carton with built-in shockproof foam to prevent extrusion and deformation, suitable for cross-border transportation.
Supply Status: In stock, same-day delivery. Bulk orders and urgent orders are acceptable.
Price: Negotiable. Preferential price for large orders. Original factory standard warranty is provided (12 months or 2000 working hours, whichever comes first).
Fit Guarantee: Strictly verify part number and material number before delivery to ensure 100% compatibility with SANY 365H.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Changsha Xionglang International Trade Co., Ltd.
Location
Changsha Construction Machinery Industrial Park, No. 78, South Section, East Shiyi Road, Changsha District, China (Hunan) Free Trade Pilot Zone
Contact Person
Qin