Dual Band, High Speed 11ax Wi-Fi6 Standard 5g Router with Unisoc Chipset

KS-5G-XM520P is an high speed 11ax Wi-Fi6 standard 5G router with SIM card slot, with Unisoc chipset, dual band, maximum 2.2Gbps in 5G speed, plug and play, satisfied with growing-up high speed mobile connections requirements and provides the fast speed beyond your imagination.

1. 5G speed: NSA: Max. 2.2Gbps(DL)/575Mbps(UL); SA: Max. 2Gbps(DL)/1Gbps(UL); LTE: 600Mbps(DL)/150Mbps(UL); UMTS: 42Mbps(DL)/11Mbps(UL);
2. Bands: 5G: NSA:n41/78/79;  SA: n1/28/41/77/78/79; LTE-FDD: B1/B2/B3/B5/B7/B8/B20/B28; LTE-FDD: B34/B38/B39/B40/B41; WCDMA:B1/B2/B5/B8
3. WiFi: 11ax Wi-Fi6 standard, 2.4G+5.8G dual band, 1800Mbps data rate, 2.4G and 5.8G SSID combined together, 5.8G prior
4. Interface: 3*10/100/1000Mbps RJ45 ports, one port support 48V PoE output, 1*SIM card slot; 1* DC injector, 1*WPS, 1*LED on/off button
5. Firmware support Router/5G, support VPN, IPv6,Guest Wi-Fi, Parental control, SMS, Phone book, Guest network, WPA3
6. Optional: eSIM, SIM Lock, RJ11 VoLTE, Mesh
7. Mark: SKD shipment, bands and LOGO customized
 

2 years warranty

 

Q1. 5G bands:
A: Right now it can support global bands or locally bands;
We suggest to select the one which can meet with local bands as samples; 
In the mass orders, we can customize the 5G bands if QTY large to save cost and increase the quantity;

Q2. OEM & ODM service
A: OEM: provide your LOGO to us, we can add your LOGO on the product, firmware and package; 
Content will be limited by MOQ;

ODM: we can provide PCBA, housing and firmware ODM service:
PCBA: 2~3 month to finish it;
Housing: 2 month after finish the PCBA;
Firmware: we can provide the open source driver for customer to develop their firmware;
We can provide DTS files if want; 
And we can provide technical support in customer firmware development.

Q3. If support out of China production:
A. Yes, this is developed by our engineers, we can support SKD and CKD;
We can provide the SOP of assemble and finished product testing;
But for the CKD, firstly you can do the RF calibration, 2nd you should have engineer to debug the problem;
We can provide SOP or all documents, and we can send engineers to provide technical support, but will be costly.