LR034262 Rear Air Spring For Range Rover L405
OE Number: LR034262
Product Name: Rear Air Spring / Rear Air Suspension Bag
Installation Position: Rear Axle. Universal rear left & rear right for VIN up to HA999999; Only fits rear right for VIN from JA000001 onwards. For chassis without ACE active stabilizer system.
LR034262 is high‑quality replacement rear air spring for Land Rover Range Rover L405 non‑ACE air struts. Built with multi‑layer reinforced EPDM cord fabric rubber, it features excellent ozone‑aging resistance, wide temperature tolerance and outstanding anti‑fatigue performance for stable sealing. 1:1 original shape, air nozzle and mounting bases enable direct replacement without modification. It resolves common failures: slow air leakage from cracked bladder, rear‑end sagging, uneven vehicle height, suspension pressure loss, abnormal noise and suspension warning light. Every unit is tested by high‑pressure air tightness and durability tests. Fully compatible with factory EAS suspension system, it avoids expensive full‑strut replacement and reduces repair costs.
Note: Only for vehicles without ACE active stabilizer system. Not for ACE‑equipped or mechanical spring suspension. Please double‑check VIN and original OE number before purchase.
- Land Rover Range Rover L405｜2013‑2022, non‑ACE air suspension
VIN ≤ HA999999: fits rear left & rear right; VIN ≥ JA000001: rear right only. Matching rear left OE: LR034263
Compatible engines: 3.0T Diesel, 3.0T Petrol, 5.0L Petrol, 5.0T Supercharged (exclude 2.0L PHEV)
LR044853, LR081576, LR089235, LR100656, LR101593, LR101594
Remark: These are factory‑superseded part numbers with identical structure, dimension and performance. Always verify original marking prior to installation.
Q1: Is this air spring universal for both rear sides? Does it fit all L405?
A: Universal for rear left and right for VIN up to HA999999. For VIN JA000001 and later, it is rear‑right only, use LR034263 for rear left. Only fits non‑ACE chassis, ACE‑equipped vehicles are incompatible.
Q2: Is full strut assembly required for slow air leakage?
A: No. If strut core is oil‑free, damping works properly and strut tube is undamaged, replace only this air spring.
Q3: What steps are required after installation?
A: Complete air‑tightness test, body height calibration and fault code reset with professional Land Rover diagnostic tool, otherwise abnormal ride height and suspension errors will occur.
Q4: Why does leakage occur shortly after new air spring installation?
A: Usually not caused by air spring defect. Common reasons: worn reused seals, improper assembly, damaged air pipes or faulty valve block. Inspect all sealing components during fitting.
Q5: What is excluded from warranty coverage?
A: 12‑month warranty covers manufacturing defects. Damage from stone puncture, impact, rough installation and secondary damage due to deformed chassis is excluded.
Q6: Can it be used on chassis with ACE active anti‑roll system?
A: No. ACE‑fitted vehicles require dedicated ACE‑spec rear air spring, part numbers are not interchangeable.
- OEM & Private Label: Custom logo printing, neutral packing and custom color box available.
- Mass Production: Support large‑volume orders, custom mold development based on samples or drawings, full‑container orders acceptable.
- One‑stop Suspension Parts Supply: Air compressor, valve block, air springs, bump stops, dust boots and seal kits are available.
- E‑commerce Support: Provide real‑shot photos and specification documents for Amazon, eBay, AliExpress and other cross‑border store listings.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.