European Best Seller Electric Automatic Aluminum Foil Cutting Machine Paper-Carton Packaged with Motor as Core Component

Automatic aluminum foil cutting machine/aluminum foil cutter machine

Suitable for cutting copper foil, aluminum foil.

Application

Also the cutting machine is suitable for cutting tube, ribbon/webbing/belt, cable/wire, sheet, film etc.

Tube:  PVC tube, heat shrink tube, PVC heat shrinking tube, fiberglass tube, Teflon tube, corrugated tube, etc.

Cable: Flat cable, copper wire, etc

Tape: nickel strap, hook and loop, cotton tape, elastic band, plastic tape, zipper, conductive tape,foam, etc

 Sheet: battory separator, Nickel sheet, diffusersheet, plastic/rubber sheet, pvc sheet,etc

 Film: plastic film, reflecting film, double-sided tape, Malar film, insulation paper, PE, Copper/Aluminum foil, release paper,etc

Key Features

1.High speed: It can cut 100~120 cut per minute. (50mm long)

2.Accuracy: Cut-length is accurate, cut length can be set between 0.1-9999.9mm.

3.Cutting type: Both for cold cut and hot cut. Hot cut suitable for materials that needs hot sealing, such as Nylon webbing, polyester webbing, etc.

4.Automatic operation: It works automatically only by setting length and quantity. Save labor, high efficiency.

5.Automatic stopper: It stops automatically if materials run out during operation

6.Memory: Set-length, set-q'ty & set-speed are not erased even if power off & on

7.Application:The cutting machine is suitable for cutting tubes, cable, webbing/ribbon/belt, small wire, sheet and film, etc.

8.High speed, high accuracy, designed for cutting non-adhesive materials.

Specification

Our Cutting machine models:

YS-100(Cutting width:0-100mm)

YS-120(Cutting width:0-120mm)  

YS-160 (Cutting width:0-160mm)  

YS-200W (Cutting width:0-200mm)  

YS-250W (Cutting width:0-250mm)  

YS-300W (Cutting width:0-300mm)  

Automatic copper foil cutting machine