Automatic Latex Tube Cutter PVC Heat Shrinking Tube Cutting Machine for Automation Assebbley Line

Application

The cutting machine is suitable for cutting tube, ribbon/webbing/belt, cable/wire, sheet, film etc.

Tube:  PVC tube, heat shrink tube, PVC heat shrinking tube, fiberglass tube, Teflon tube, corrugated tube, etc.

Cable: Flat cable, copper wire, etc.

Tape: nickel strap, cotton tape, elastic band, plastic tape, zipper, conductive tape, foam, etc.

Sheet: battery separator, Nickel sheet, diffuser sheet, plastic/rubber sheet, pvc sheet, etc.

Film: plastic film, reflecting film, double-sided tape, Malar film, insulation paper, PE, Copper/Aluminum foil, release paper, etc.

one machine suitable for cutting various kinds of materials

Features

1.High speed: It can cut 100~120 cut per minute. (50mm long)

2.Accuracy: Cut-length is accurate, cut length can be set between 0.1-9999.9mm.

3.Cutting type: For cold cut and Optional hot cut. Hot cut suitable for materials that needs hot sealing, such as Nylon webbing, polyester webbing, etc.

4.Automatic operation: It works automatically only by setting length and quantity. Save labor, high efficiency.

5.Automatic stopper: It stops automatically if materials run out during operation

6.Memory: Set-length, set-q'ty & set-speed are not erased even if power off & on

7.Application:The cutting machine is suitable for cutting tubes, cable, webbing/ribbon/belt, small wire, sheet and film, etc.

8.High speed, high accuracy, designed for cutting non-adhesive materials.

Hot and Cold Cutting Machine

Applications

Suitable for hot cutting material to fuse together

Specifications

Voltage: 220V/110V 50/60Hz

Power: 500W

Temperature: 0°---750° adjustable

Cutting Length: 0.1---9999.9mm

Cutting Width: 0-100mm

Weight: 30KG

Size: L360*W300*H350mm

Automatic Cutting Machine With Feeding Device

Introduction

Automatic feeding system is applicable for bigger and heavier material cutting machine. It is suitable for all cutting machine models.

Ordering information

PS: For cutting tubes, according to the diameter of the tubes, choose suitable machine.

YS-100: Cut tubes with diameter less than 13mm

YS-120WH: Cut tube with diameter less than 23mm

Contact Us

                                      Wechat                                                                         WhatsApp