330 Standard PCB SMT Loader Machine 920mm Full Automatic Feeding
HDY-J330SB standard magazine loader is mainstream automatic PCB feeding equipment matched for complete SMT assembly lines, stencil printers, high-speed pick and place machines and reflow ovens. It automatically feeds bare PCBs from standard magazine racks to the front-end of SMT equipment, eliminating manual board feeding and improving workshop automation level.
The machine frame adopts thickened industrial aluminum profile rails matched with wear-resistant bird-nest plastic conveyor chain, stable transmission and no scratch on PCB surface. Lifting system uses 90W brake motor paired with precision ball screw to realize step-by-step magazine lifting; users can switch lifting pitch freely among 10/20/30/40mm via touch screen to fit different PCB thicknesses. The conveying section is driven by 15W fixed-speed motor, with unidirectional left-to-right PCB transmission.
Equipped with full pneumatic clamping structure, the push cylinder position supports screw fine adjustment to adapt different magazine sizes; standard magazine inner size L460*W400*H565mm, maximum storage capacity up to 50 circuit boards, compatible with PCB within L450*W330mm. The whole machine adopts PLC programmable controller + XINTEK true-color touch screen human-machine interface, supporting one-click parameter setting, automatic board loading, real-time fault alarm and production counting. Standard independent electrical control cabinet, matching 220V 50Hz industrial power supply, applicable air pressure range 0.4–0.6MPa, fixed conveying height 920±30mm consistent with global standard SMT equipment height for seamless docking.
- Precision ball screw lifting with brake motor: Low-cost competitors use ordinary chain lifting with big positioning error; 90W brake motor locks position instantly, no magazine slipping, stable lifting of 4 pitch options.
- Special bird-shaped plastic chain + aluminum rail: Ordinary loaders use cheap rubber belts easy to wear and deform; dedicated anti-static plastic chain avoids PCB edge scratch, long service life.
- Adjustable pneumatic push cylinder with screw fine-tuning: Most low-end loaders have fixed cylinder position, hard to fit non-standard magazines; screw adjustment realizes flexible position calibration, wider magazine compatibility.
- True color industrial touch screen + complete PLC logic control: Peer entry-level loaders use monochrome text panel with single function; XINTEK true color screen stores multiple production recipes, supports automatic feeding cycle optimization.
- Standard 50PCS large-capacity magazine loading: Ordinary compact loaders only hold 30–40 boards; full-load 50PCS reduces frequent magazine replacement frequency, cuts operator workload.
- Standard unified 920±30mm industry working height: No heightening support needed when docking all brands SMT printers, mounters, SPI and AOI machines, plug-and-play SMEMA signal communication.
- Integrated independent electric control box: Cheap loaders adopt exposed scattered wiring with dust and static hazards; centralized control cabinet realizes ESD protection, easy circuit inspection and maintenance.
- Stable dual motor split drive system: Single-motor integrated drive of competitors leads to speed conflict between lifting and conveying; separate 90W lift motor + 15W transport motor ensures synchronous and smooth operation without board jam.
- Full SMT production line front-end feeding: Match SMT stencil printer, high-speed pick and place machine, LED mounter, automotive electronic patch line
- Consumer electronics PCB mass production: Mobile mainboard, power supply board, LED drive board, household appliance control board within 450*330mm
- Medium-sized intelligent unmanned SMT workshop: Cooperate with PCB unloader, parallel transfer machine to form fully automatic closed-loop PCB handling system
- Multi-spec mixed batch SMT production: Quickly switch lifting pitch 10/20/30/40mm on touch screen to adapt PCB of different thickness
- Electronic manufacturing factory line renovation & capacity expansion: Standard size compatible with most existing SMT equipment layout, low transformation cost
- Communication equipment, medical electronics rigid PCB patch production: Pneumatic soft clamping protects thin and fragile circuit boards from deformation
A: Maximum supported PCB dimension L450*W330mm, matched standard magazine inner size L460*W400*565mm, fully compatible mainstream medium-size rigid PCBs for SMT industry.
A: Standard full storage capacity reaches 50 PCS; actual loading quantity can be adjusted according to PCB thickness and lifting pitch setting.
A: Four optional pitches: 10mm, 20mm, 30mm, 40mm, freely switched on touch screen to match boards of different thickness.
A: It supports standard SMEMA communication signal interface, seamlessly compatible with Yamaha, Juki, Fuji, Hanwha, Samsung and domestic mainstream SMT printers, mounters and reflow ovens.
A: Standard power supply AC220V 50Hz; working air pressure range 0.4–0.6MPa, matched common factory central air supply system without extra air compressor modification.
A: Yes, the pneumatic push cylinder is equipped with screw fine-tuning structure, operators can adjust forward/backward position to fit different magazine specifications.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.