Functional safety related parameters | ||||
Safety Integrity Level (SIL) | SIL 3 | SIL 2 | ||
Supply | ||||
Connection | via 14-channel flat cable from the KFD2-HMM-16 primary module | |||
HART signal channels (non-intrinsically safe) | ||||
Conformity | HART field device input (revision 5 to 7) | |||
Connection | 26-pin flat cable for analog connections 14-pin flat cable for primary module/secondary module connection between KFD2-HMM-16 and KFD0-HMS-16 | |||
Leakage current | < 3 µA at -20 ... 85 °C (-4 ... 185°F) | |||
Terminating resistor | external 230 ... 500 Ω standard (up to 1000 Ω possible) | |||
Output voltage | ≥ 400 mV ss (with the terminator resistance specified above) | |||
Output resistance | 100 Ω or smaller, capacitive coupling | |||
Input impedance | according to HART specification | |||
Input voltage range | 0.08 ... 4 V ss ; typ. ± 5.2 V as local reference | |||
Indicators/settings | ||||
Labeling | space for labeling at the front | |||
Directive conformity
| ||||
Electromagnetic compatibility | ||||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |||
Conformity | ||||
Degree of protection | IEC 60529:2001 | |||
Ambient conditions | ||||
Ambient temperature | -20 ... 65 °C (-4 ... 149 °F) | |||
Mechanical specifications | ||||
Degree of protection | IP20 | |||
Mass | approx. 100 g | |||
Dimensions | 20 x 93 x 115 mm (0.8 x 3.7 x 4.5 inch) (W x H x D) , housing type B1 | |||
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |||
Data for application in connection with hazardous areas | ||||
Certificate | PF 07 CERT 1143 X | |||
Marking | II 3G Ex nA IIC T4 Gc | |||
Directive conformity | ||||
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 | |||
General information | ||||
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |||
Have questions about our products or want to discuss a custom order? Our team is ready to help you.