1KV Heat Shrink Termination Kit Weather Resistant Low Voltage Termination Kit
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
3-5 work days
Brand:
XingQi
Product Description
1KV Low‑Voltage Heat‑Shrink Termination Kits / Heat‑Shrink Straight Joint Kits
Suitable for below 1kV rubber‑insulated cables
Product Introduction
Shelf Life and Storage:
The 1kV heat‑shrink termination & straight joint kits feature long shelf life. Store in an environment with temperature ranging from ‑10 ℃ to 40 ℃ and relative humidity below 75%.
The 1kV heat‑shrink termination & straight joint kits feature long shelf life. Store in an environment with temperature ranging from ‑10 ℃ to 40 ℃ and relative humidity below 75%.
Performance Features:
- High mechanical strength
- Compatible with a wide range of cable cross‑sections
- Compact and simple design
- Excellent UV resistance and weather resistance
- Energization is permitted immediately after installation
- Easy and simple installation
| Shelf‑Life & Storage |
| Product: 1kV Heat‑Shrink Termination / Straight Joint Kits |
| Long shelf‑life |
| Storage condition: ‑10℃ ~ 40℃, relative humidity less than 75% |
| Product Features |
| High mechanical strength |
| Suitable for various cable cross‑sections |
| Compact design |
| Excellent UV resistance and weather‑aging performance |
| Power‑on available immediately after installation |
| Easy and simple installation |
Selection Table for 0.6/1.0kV 4‑Core Heat‑Shrink Cable Intermediate Joints
| Product Name | Model Specification | Cable Cross‑section (mm²) |
|---|---|---|
| 4‑Core Intermediate Joint | XQ‑1/4.0 | 10‑16 |
| 4‑Core Intermediate Joint | XQ‑1/4.1 | 25‑50 |
| 4‑Core Intermediate Joint | XQ‑1/4.2 | 70‑120 |
| 4‑Core Intermediate Joint | XQ‑1/4.3 | 150‑240 |
| 4‑Core Intermediate Joint | XQ‑1/4.4 | 300‑500 |
The above quotation excludes hardware fittings and grounding wires.
0.6/1.0kV 4‑Core Heat‑Shrink Cable Straight Joint Selection — Multi‑Core Non‑Armored
Standard Kit Contents
| Medium‑wall heat‑shrink tube with adhesive |
| Waterproof sealing tape |
| PVC tape |
| Gauze strip |
| Protective gloves |
| Cleaning kit |
| Cleaning wipe |
0.6/1.0kV 4‑Core Heat‑Shrink Cable Straight Joint Selection — Multi‑Core Armored
| Medium‑wall heat‑shrink tube with adhesive |
| Waterproof sealing tape |
| PVC tape |
| Gauze strip |
| Grounding wire |
| Constant force spring |
| Cleaning kit |
| Cleaning wipe |
| Protective gloves |
0.6/1.0kV 4‑Core Heat‑Shrink Cable Straight Joint Installation — Multi‑Core Non‑Armored
| Step 1: Prepare the complete set of heat‑shrink tubes |
| Step 2: Prepare crimping tools (mechanical type, hydraulic type) |
| Step 3: Cable insulation length (measure and mark crimping length) |
| Step 4: Strip cable insulation (according to terminal size) |
| Step 5: Slide on the large heat‑shrink outer sheath tube |
| Step 6: Slide on the small heat‑shrink tube |
| Step 7: Fit terminals and complete crimping |
| Step 8: Slide on small heat‑shrink tubes and heat each until tightly wrapped around cables |
| Step 9: Slide on the large heat‑shrink tube and heat until tightly wrapped around cables |
0.6/1.0kV 4-Core Heat-Shrink Cable Straight Joint Installation — Multi-Core Armored
|
Step 1: Prepare the complete set of heat-shrink tubes
|
|
Step 2: Prepare crimping tools (mechanical and hydraulic type)
|
|
Step 3: Measure and mark the crimping length of cable insulation
|
|
Step 4: Strip the cable insulation according to the terminal size
|
|
Step 5: Slide on the large heat-shrink outer sheath tube
|
|
Step 6: Slide on the small heat-shrink tube
|
|
Step 7: Install and crimp the cable terminals firmly
|
|
Step 8: Slide on the small heat-shrink tubes and heat until tightly fitted to the cable
|
|
Step 9: Fix both ends of the grounding wire with constant force springs
|
|
Step 10: Slide on the large heat-shrink tube and heat until tightly fitted to the cable
|
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Xingqi Plastic Products Co., Ltd.
Location
Building A, Tongfukang Creative Technology Park, No. 202 Shihuan Road, Shiyan Subdistrict, Bao'an District, Shenzhen, Guangdong Province
Contact Person
Liao Wanhu