Dielectric Alumina Ceramic Bar Custom Alumina Rod High Compressive Strength
High Purity Alumina Dielectric Rod Custom Tapered Ceramic Bar for RF Microwave Insulation
Alumina ceramic part is produced by firing a tightly packed powder form of Al2O3 which includes some binder material. Commercially available grades range from 90% up to 99.95% with the higher purity generating somewhat higher hardness. It is possible to machine alumina using diamond grinding techniques. Polishing is also possible, with the degree attainable affected by alumina grain size and production technique, like pressed or extruded.
Our alumina dielectric rod is manufactured from high‑purity Al₂O₃ ceramic material. Featuring low dielectric loss, stable dielectric constant, excellent electrical insulation and high mechanical strength, it performs reliably under high‑frequency, high‑voltage and high‑temperature working conditions.
The product adopts precision dry‑press forming and high‑temperature sintering process. It delivers tight dimensional tolerance, smooth ivory‑white surface and outstanding chemical corrosion resistance. Custom shapes such as tapered ends, special cross‑section and reserved grooves are available according to customer drawings.
Widely applied in high‑frequency electronic components, radio‑frequency equipment, microwave devices, sensor assemblies and high‑voltage insulation systems. Multiple purity grades and dimension specifications are supported to meet diverse technical requirements.
Alumina Oxide (Al2O3) Properties:
◆ High Hardness
Strong wear resistance, durable and not easy to wear.
◆ Excellent Thermal Conductivity
The thermal conductivity at room temperature is 30~40W/(m·K), which is higher than that of steel, copper and aluminum.
◆ Good Chemical Stability
Resistant to acid, alkali and salt corrosion.
◆ High Temperature Stability
Withstands 1600℃ high temperature and has high temperature stability.
| Chemical Formula | Al2O3 | |
| Mechanical | Density | 3.7 gm/cc |
| Hardness |
2000 Knoop |
|
| Tensile Strength | 28 kpsi | |
| Modulus Of Elasticity | 41 - 46 x 106 psi | |
| Flexural Strength | 51 kpsi | |
| Compressive Strength | 300 - 350 kpsi | |
| Poissons Ratio | 0.21 | |
| Fracture Toughness | 4 - 5 MPa m½ | |
| Electrical | Dielectric Strength | 212 - 220 ac V/mil |
| Dielectric Constant | 9.3 (@ 1 MHz) | |
| Volume Resistivity | > 1014 ohm-cm | |
| Thermal | Coefficient Of Thermal Expansion | 5.2 - 7.9 x 10⁻⁶/°C |
| Thermal Conductivity | 18.0 - 28.0 W/mK | |
| Specific Heat | 0.21 cal/g °C | |
| Shock Resistance | 300 °C Diff. | |
Typical Applications Include:
Wear resistant components,
High pressure nozzles,
Thermocouple tubes,
Electrical Insulators,
Corrosive labware,
Furnace fixtures,
Ballistic armor,
Thread guides,
Laser Tubes,
Pump seals.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.