99% Al2O3 Ceramic Sleeve Bushing With Precision Drilling
99% Al₂O₃ Ceramic Inner Liner Bushing Sleeve with Precision Drilling
Alumina ceramic part is produced by firing a tightly packed powder form of Al2O3 which includes some binder material. Commercially available grades range from 90% up to 99.95% with the higher purity generating somewhat higher hardness. Alumina Ceramics are the most highly regarded and widely used of the ceramic products. It is non-conductive, resistant to corrosion, and are perfect for electrical insulation. Alumina Ceramic has proven to be the best ceramic for protection of vital electrical components. It can be processed as tubing, sheets, bars, rods, discs, and many other forms depending on the requirements of the project.
Our alumina ceramic inner bushing is fabricated from high‑purity 99% alumina (Al₂O₃). It delivers high mechanical strength, exceptional wear resistance, excellent chemical corrosion resistance and reliable electrical insulation.
Custom precision machining is available, including inner & outer diameter, wall thickness and multi‑hole drilling as per customer drawings. This ceramic inner bushing keeps stable physical properties under high‑temperature and harsh corrosive environments. It is commonly used as protective inner lining for industrial equipment, thermal devices and chemical processing facilities to reduce medium erosion and mechanical friction, prolonging equipment service life. Custom sizes and hole layouts are acceptable.
Alumina Oxide (Al2O3) Properties:
◆ High Hardness
Strong wear resistance, durable and not easy to wear.
◆ Excellent Thermal Conductivity
The thermal conductivity at room temperature is 30~40W/(m·K), which is higher than that of steel, copper and aluminum.
◆ Good Chemical Stability
Resistant to acid, alkali and salt corrosion.
◆ High Temperature Stability
Withstands 1600℃ high temperature and has high temperature stability.
| Chemical Formula | Al2O3 | |
| Mechanical | Density | 3.7 gm/cc |
| Hardness |
2000 Knoop |
|
| Tensile Strength | 28 kpsi | |
| Modulus Of Elasticity | 41 - 46 x 106 psi | |
| Flexural Strength | 51 kpsi | |
| Compressive Strength | 300 - 350 kpsi | |
| Poissons Ratio | 0.21 | |
| Fracture Toughness | 4 - 5 MPa m½ | |
| Electrical | Dielectric Strength | 212 - 220 ac V/mil |
| Dielectric Constant | 9.3 (@ 1 MHz) | |
| Volume Resistivity | > 1014 ohm-cm | |
| Thermal | Coefficient Of Thermal Expansion | 5.2 - 7.9 x 10⁻⁶/°C |
| Thermal Conductivity | 18.0 - 28.0 W/mK | |
| Specific Heat | 0.21 cal/g °C | |
| Shock Resistance | 300 °C Diff. | |
Typical Applications Include:
Wear resistant components,
High pressure nozzles,
Thermocouple tubes,
Electrical Insulators,
Corrosive labware,
Furnace fixtures,
Ballistic armor,
Thread guides,
Laser Tubes,
Pump seals.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.