Excellent Hardness 99.7% Al2O3 Alumina Ceramic Threaded Plunger
High Hardness Alumina Ceramic Plunger Threaded for Metering Pump Reciprocating Equipment
Alumina ceramic part is produced by firing a tightly packed powder form of Al2O3 which includes some binder material. Commercially available grades range from 90% up to 99.95% with the higher purity generating somewhat higher hardness. Alumina Ceramics are the most highly regarded and widely used of the ceramic products. It is non-conductive, resistant to corrosion, and are perfect for electrical insulation. Alumina Ceramic has proven to be the best ceramic for protection of vital electrical components. It can be processed as tubing, sheets, bars, rods, discs, and many other forms depending on the requirements of the project.
Alumina Ceramic Plunger
Made of high‑purity alumina (Al₂O₃) ceramic, this plunger features excellent hardness, wear resistance and corrosion resistance. It is fitted with embedded metal threaded studs for easy installation. Outstanding insulating property and high‑temperature stability make it suitable for industrial pumps, metering equipment and mechanical reciprocating motion systems. Low surface roughness reduces friction loss, extending service life under continuous working conditions.
Alumina Oxide (Al2O3) Properties:
◆ High Hardness
Strong wear resistance, durable and not easy to wear.
◆ Excellent Thermal Conductivity
The thermal conductivity at room temperature is 30~40W/(m·K), which is higher than that of steel, copper and aluminum.
◆ Good Chemical Stability
Resistant to acid, alkali and salt corrosion.
◆ High Temperature Stability
Withstands 1600℃ high temperature and has high temperature stability.
Key Properties
- High working temperature up to 1600℃
- Excellent electrical insulation performance
- High bending strength & hardness
- Good resistance to acid‑base corrosion
- Custom dimensions and tolerances supported
Applications
Thermocouple protection tubes, furnace insulation components, heating element sleeves, electronic insulating parts, industrial high‑temperature equipment.
| Chemical Formula | Al2O3 | |
| Mechanical | Density | 3.7 gm/cc |
| Hardness |
2000 Knoop |
|
| Tensile Strength | 28 kpsi | |
| Modulus Of Elasticity | 41 - 46 x 106 psi | |
| Flexural Strength | 51 kpsi | |
| Compressive Strength | 300 - 350 kpsi | |
| Poissons Ratio | 0.21 | |
| Fracture Toughness | 4 - 5 MPa m½ | |
| Electrical | Dielectric Strength | 212 - 220 ac V/mil |
| Dielectric Constant | 9.3 (@ 1 MHz) | |
| Volume Resistivity | > 1014 ohm-cm | |
| Thermal | Coefficient Of Thermal Expansion | 5.2 - 7.9 x 10⁻⁶/°C |
| Thermal Conductivity | 18.0 - 28.0 W/mK | |
| Specific Heat | 0.21 cal/g °C | |
| Shock Resistance | 300 °C Diff. | |
Alumina Ceramics Typical Applications Include:
Wear resistant components,
High pressure nozzles,
Thermocouple tubes,
Electrical Insulators,
Corrosive labware,
Furnace fixtures,
Ballistic armor,
Thread guides,
Laser Tubes,
Pump seals.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.