Automatic Magnetic Buckle Endurance Tester for Bag and Luggage Fastener Durability for Test Machine
Price:
$1,500-3,000 / piece
MOQ:
1 piece
Delivery Time:
Negotiable
Brand:
HUAKAI
Product Description
Product Overview
The HK-560 Magnetic Buckle Fatigue Testing Machine is designed to simulate the real-world usage of magnetic snaps, Velcro, and other closure fasteners on bags and luggage. By repeatedly opening and closing the fastener at a controlled speed and angle, this machine tests the quality and durability of both the fastener and its assembly. It is widely used in quality control for luggage, handbags, and garment accessories, ensuring compliance with international standards.
Functions & Application Areas
Functions:
Functions & Application Areas
Functions:
* Simulates repeated opening and closing of magnetic snaps and fasteners.
* Evaluates fastener durability, deformation, and damage under continuous use.
* Automatic counting with memory function to record cycles accurately.
* Provides test results for product improvement and quality assurance.
Applications:
* Luggage and suitcase manufacturing quality control.
* Handbag and fashion accessory durability testing.
* Garment manufacturing and hardware testing laboratories.
* Research and development of magnetic and Velcro closures.
* Evaluates fastener durability, deformation, and damage under continuous use.
* Automatic counting with memory function to record cycles accurately.
* Provides test results for product improvement and quality assurance.
Applications:
* Luggage and suitcase manufacturing quality control.
* Handbag and fashion accessory durability testing.
* Garment manufacturing and hardware testing laboratories.
* Research and development of magnetic and Velcro closures.
Product Paramenters
Item | Specification | ||||||
Control Method | Touchscreen control | ||||||
Counter | Records opening and closing cycles (one full open-close cycle counts as one) | ||||||
Drive System | Eccentric wheel transmission design | ||||||
Testing Speed | 0–20 cycles/min (adjustable) | ||||||
Opening Angle | 0–90° adjustable | ||||||
Opening Speed | (600 ± 10)°/min adjustable | ||||||
Control System | Programmable PLC with touchscreen interface, memory function, and real-time display of set and current cycles | ||||||
Compliance Standards | QB/T 1333-2018, QB/T 5084-2017 | ||||||
Dimensions (L × W × H) | 500 × 400 × 350 mm | ||||||
Weight | 65 kg | ||||||
Power Supply | AC 220V, 50Hz | ||||||
Products Description
Structure & System Configuration
1. Sample Fixing Device: Composed of upper and lower sample clamps, where the upper clamp holds the part with the magnetic buckle or closure and the lower clamp holds the corresponding part of the bag body.
2. Opening/Closing Mechanism: Connects to the speed and angle control system, performing repeated opening and closing actions.
3. Counter: Automatically records each complete opening and closing cycle.
4. Control System: Automatically stops operation in case of anomalies, with memory function for accurate test tracking.
Testing Method
1. Adjust the machine according to the sample structure and size.
2. Secure the upper and lower fastener components to the sample fixing device.
3. Set the zero point at the fully closed position, then adjust the opening angle so that the fastener fully opens.
4. Start the test and allow the machine to run until the target number of cycles is reached.
5. Inspect the fastener and record any deformation, cracking, detachment, or damage.
Result Display
Results are expressed by recording the number of opening/closing cycles and noting any changes or damage to the sample.
Applicable International / National Standards
* QB/T 1333-2018
* QB/T 5084-2017
1. Sample Fixing Device: Composed of upper and lower sample clamps, where the upper clamp holds the part with the magnetic buckle or closure and the lower clamp holds the corresponding part of the bag body.
2. Opening/Closing Mechanism: Connects to the speed and angle control system, performing repeated opening and closing actions.
3. Counter: Automatically records each complete opening and closing cycle.
4. Control System: Automatically stops operation in case of anomalies, with memory function for accurate test tracking.
Testing Method
1. Adjust the machine according to the sample structure and size.
2. Secure the upper and lower fastener components to the sample fixing device.
3. Set the zero point at the fully closed position, then adjust the opening angle so that the fastener fully opens.
4. Start the test and allow the machine to run until the target number of cycles is reached.
5. Inspect the fastener and record any deformation, cracking, detachment, or damage.
Result Display
Results are expressed by recording the number of opening/closing cycles and noting any changes or damage to the sample.
Applicable International / National Standards
* QB/T 1333-2018
* QB/T 5084-2017
Details Images
Certifications
Company Profile
Product packaging
Packaging & Shipping
• Internal Protection: Anti-collision foam padding and moisture-proof wrapping are applied to prevent mechanical damage and corrosion during transit.
• Marking & Labeling: Each package is clearly labeled with model number, dimensions, weight, and handling instructions for easy identification.
• Loading: All packages are reinforced and suitable for forklift handling and container loading.
• Shipping Options: By sea, air, or express courier according to customer preference.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Dongguan Huakai Test Equipment Technology Co., Ltd.
Location
23.120050092731365, 113.80487611226312
Contact Person
Jiahui Hu