Speedybee Nano 2.4ghz / 915mhz Expresslrs Elrs Ultra Lightweight for Racer Drone Rc Model
| Product Features | |
| Wheelbase | Screws |
| Size | 10.4mm*18.4mm |
| For Vehicle Type | Airplanes |
| Technical parameters | value 2 |
| Quantity | 1 pcs |
| Material | NYLON |
| place of origin | Guangdong, China |
| Tool Supplies | Assembled class |
| Model Number | SpeedyBee Nano 2.4Ghz / 915MHz RX |
| Hign-concerned Chemical | none |
| Four-wheel Drive Attributes | Assemblage |
Model | SpeedyBee Nano 2.4GHz RX |
Name | ExpressLRS Receiver |
Frequency | 2.4Ghz |
Antenna | T-antenna (56*82mm, 0.6g) |
Chip | SX1281 ESP8285 |
Power | 100mW(Measured around 170mW) |
Input voltage | 5V |
Antenna connector | IPEX1 |
Weight | 0.7 gram(without antenna) |
Dimension | 10.4mm*18.4mm |
Default Firmware | SpeedyBee Nano 2.4GHz RX 3.4.3 |
Model | SpeedyBee Nano 915MHz RX |
Name | ExpressLRS 915MHz Receiver |
Frequency | 915MHz |
Antenna | T-antenna (138*104mm, 3g) |
Chip | SX1276 ESP8285 |
Power | 50mW |
Input voltage | 5V |
Antenna connector | IPEX1 |
Weight | 0.7 gram(without antenna) |
Dimension | 11mm*17mm |
Default Firmware | SpeedyBee Nano 915MHz RX 3.4.2 |
Double red blinking | binding |
Slow red blinking | powering up but unlinked, no packages received from the transmitter |
Solid red | receiver is connected, with signal received |
Fast red flashing | Wi-Fi is turned on, and updating via Wi-Fi is available |
To turn on Wi-Fi, wait for 60 seconds after powering on or long press button for 3 seconds |
Quick to cut off the power 3 times, it enters the binding mode |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.