Matek F405 MiniTE OSD Baro Blackbox Flight Controller For ArduPilot INAV BetaFlight 20Xmm 30X Airplane FPV Drone
Price:
$43.80 / piece
MOQ:
1 piece
Delivery Time:
Negotiable
Brand:
MATEK
Product Description
| Product Features | |
| brand name | MATEK |
| private mold | No |
| Material | Abs. |
| place of origin | Guangdong, China |
* F405 has 1MB flash which can run with ArduPilot fw. even with INAV firmware, some features will be removed on
F722 due to limited flash
* The advantage of F722 is all UARTs have builtin inversion which is not needed when CRSF protocol is widely used
on new receivers.
* Redesigned target MATEKF405TE support 8x bi-directional DSHOT, SPI1, SPI2, ADC without DMA clash.
* Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX
* Compared with F722-miniSE 8motors or 6motor 2servos, F405-miniTE support 8motors 3servos in INAV/BF multirotor
mixer
* InvenSense GEN3 IMU ICM42605
FC Specifications
* MCU: STM32F405RGT6
* IMU: ICM42605
* OSD: AT7456E
* Baro: Goertek SPL06-001 (I2C)
* Blackbox: 16M-byte Flash memory
* 6x UARTs, 1x Softserial_Tx option
* 12x PWM outputs (8x Dshot)
* 1x I2C
* 4x ADC (VBAT, Current, RSSI, Airspeed)
* 2x PINIO
* 1x SH1.0_8pin connector (Vbat/G/Curr/R3/S1/S2/S3/S4)
* 1x SH1.0_6pin connector for DJI FPV Air Unit
* 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
* Dual BEC, 5V 1.7A & 10V 1.4A
* 10V output ON/OFF switchable
* Convertible 20mm to 30.5mm mounting
Power
* Input: 6~30V (2~S LiPo)
* BEC: 5V 1.7A, Max.2A
* BEC: 10V 1.4A for VTX or DJI Air Unit
* Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)
* No Current Sensor built-in, supports external current sensor of PDB/4in1
Firmware
* ArduPilot: MatekF405-TE
* INAV: MATEKF405TE
* BetaFlight: MATEKF405TE
Physical
* Mounting
* 20 x 20mm/3mm with Silicon Grommets
* 20 x 20mm/2mm with Silicon & Brass Grommets
* 30.5 x 30.5mm/3mm with Conversion Plate and Silicon Grommets
* Dimensions: 28 x 28 mm
* Weight: 5g
Including
* 1x FC F405-miniTE
* 1x 20mm to 30.5mm conversion plate(blue PCB)
* 6x Silicon grommets M4 to M3
* 6x Brass grommets M3 to M2
* 1x SH1.0_8pin cable 5cm (including 2x 8pin connectors) for 4in1 ESC
* 1x SH1.0_6pin to GH1.25_8pin cable 8cm for DJI Air Unit
F722 due to limited flash
* The advantage of F722 is all UARTs have builtin inversion which is not needed when CRSF protocol is widely used
on new receivers.
* Redesigned target MATEKF405TE support 8x bi-directional DSHOT, SPI1, SPI2, ADC without DMA clash.
* Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX
* Compared with F722-miniSE 8motors or 6motor 2servos, F405-miniTE support 8motors 3servos in INAV/BF multirotor
mixer
* InvenSense GEN3 IMU ICM42605
FC Specifications
* MCU: STM32F405RGT6
* IMU: ICM42605
* OSD: AT7456E
* Baro: Goertek SPL06-001 (I2C)
* Blackbox: 16M-byte Flash memory
* 6x UARTs, 1x Softserial_Tx option
* 12x PWM outputs (8x Dshot)
* 1x I2C
* 4x ADC (VBAT, Current, RSSI, Airspeed)
* 2x PINIO
* 1x SH1.0_8pin connector (Vbat/G/Curr/R3/S1/S2/S3/S4)
* 1x SH1.0_6pin connector for DJI FPV Air Unit
* 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
* Dual BEC, 5V 1.7A & 10V 1.4A
* 10V output ON/OFF switchable
* Convertible 20mm to 30.5mm mounting
Power
* Input: 6~30V (2~S LiPo)
* BEC: 5V 1.7A, Max.2A
* BEC: 10V 1.4A for VTX or DJI Air Unit
* Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)
* No Current Sensor built-in, supports external current sensor of PDB/4in1
Firmware
* ArduPilot: MatekF405-TE
* INAV: MATEKF405TE
* BetaFlight: MATEKF405TE
Physical
* Mounting
* 20 x 20mm/3mm with Silicon Grommets
* 20 x 20mm/2mm with Silicon & Brass Grommets
* 30.5 x 30.5mm/3mm with Conversion Plate and Silicon Grommets
* Dimensions: 28 x 28 mm
* Weight: 5g
Including
* 1x FC F405-miniTE
* 1x 20mm to 30.5mm conversion plate(blue PCB)
* 6x Silicon grommets M4 to M3
* 6x Brass grommets M3 to M2
* 1x SH1.0_8pin cable 5cm (including 2x 8pin connectors) for 4in1 ESC
* 1x SH1.0_6pin to GH1.25_8pin cable 8cm for DJI Air Unit
Recommend Products
Customers Feedback
Packing&Shipping
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Huasheng Electronic Technology Co., Ltd.
Location
HB4082, Block B, Manha Market, 4th Floor, Extension Building, Sangda No.419 Building, Huaqiang North Road, Licun Community, Huaqiang North Subdistrict, Futian District, Shenzhen City, Guangdong Province, China
Contact Person
Chen