Wholesale Price Holybro Pixhawk 6X Pro H753 F. Controller Module Standard Base PM02D Industrial Commercial RC Drone Accessory

Key Design Point
* High-performance ADIS16470 Industrial IMU with high accelerometer dynamic range (±40 g), perfect for accurate motion sensing in demanding UAV applications
* All New advanced durable vibration isolation material with resonance frequency in the higher spectrum, ideal for industrial and commercial drone applications
* Triple redundant IMU & double redundant barometer on separate buses
* High performance STM32H753 Processor
* Modular flight controller: separated IMU, FMU, and Base system
* Safety-driven design incorporates sensors from different manufacturers and model lineups
* Independent LDO powers every sensor with independent power control.
* Ethernet interface for high-speed mission computer integration. Transformerless can be achieved using 50 Ohm termination resistors at the target device (AN2190 50 Ohm termination).
* Temperature-controlled IMU board, allowing optimum working temperature of IMUs
* Hardware switchable 3.3V or 5V signal mode (requires base board modification)

All new Vibration Isolation Design
This new vibration isolation design uses a custom-formulated durabile silicone-based isolation material in place of the
traditional foam design. Backed by extensive R&D and testing, it offers optimal IMU damping characteristics with resonance frequency in the higher spectrum, perfect for industrial and commercial drone

Note:
* FC Module a baseboard is required for this product to function. A FC Module or a Baseboard by itself will not function.

Processors & Sensors
* FMU Processor: STM32H753 * 32 Bit Arm Cortex-M7, 480MHz, 2MB flash memory, 1MB RAM
* IO Processor: STM32F103 * 32 Bit Arm Cortex-M3, 72MHz, 64KB SRAM
* On-board sensors * Accel/Gyro: ADIS16470 * ±40g, Vibration Isolated, Industrial IMU
* Accel/Gyro: IIM-42652 * ±16g, Vibration Isolated, Industrial IMU
* Accel/Gyro: ICM-45686 with BalancedGyro Technology * ±32g, Hard Mounted
* Barometer: ICP20100
* Barometer: BMP388
* Mag: BMM150
* NXP EdgeLock SE050 Plug & Trust hardware secure element

Electrical data
* Voltage Ratings:
* Max input voltage: 6VUSB Power Input: 4.75~5.25VServo Rail Input: 0~36V
* Current Ratings:
* Telem1 output current limiter: 1.5AAll other port combined output current limiter: 1.5A

Mechanical data
* Dimensions
Flight Controller Module: 38.8 x 31.8 x 30.1mm