Factory Outlet Holybro Pixhawk 6X(REV8) H753 F. Controller Module Standard Base PM02D Industrial Commercial RC Drone Accessory
Price:
$126 / piece
MOQ:
1 piece
Delivery Time:
Negotiable
Brand:
HolyBro
Product Description
| Product Features | |
| private mold | Yes |
| place of origin | Guangdong,China |
Product Description
Key Design Point
* Redundancy: 3x ICM-45686 IMU sensors (±32g) with BalancedGyro technology & 2x Barometer sensors
* High performance STM32H753 Processor with a clock speed of up to 480 MHz
* Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk Autopilot Bus connector.
* Triple redundancy domains: Completely isolated sensor domains with separate buses and separate power control
* All New advanced durable vibration isolation material with resonance frequency in the higher spectrum
* Ethernet interface for high-speed mission computer integration. Transformerless can be achieved using 50 Ohm termination resistors at the target device (AN2190 50 Ohm termination).
* Temperature-controlled IMU board, allowing optimum working temperature of IMUs
* Hardware switchable 3.3V or 5V signal mode (requires base board modification)
All new Vibration Isolation Design
This new vibration isolation design uses the same custom-formulated durable isolation material as the Pixhawk 6X Pro, instead of the traditional foam design. Backed by extensive R&D and testing, it offers optimal IMU damping characteristics with a resonance frequency in the higher spectrum, perfect for industrial and commercial drone
* Redundancy: 3x ICM-45686 IMU sensors (±32g) with BalancedGyro technology & 2x Barometer sensors
* High performance STM32H753 Processor with a clock speed of up to 480 MHz
* Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk Autopilot Bus connector.
* Triple redundancy domains: Completely isolated sensor domains with separate buses and separate power control
* All New advanced durable vibration isolation material with resonance frequency in the higher spectrum
* Ethernet interface for high-speed mission computer integration. Transformerless can be achieved using 50 Ohm termination resistors at the target device (AN2190 50 Ohm termination).
* Temperature-controlled IMU board, allowing optimum working temperature of IMUs
* Hardware switchable 3.3V or 5V signal mode (requires base board modification)
All new Vibration Isolation Design
This new vibration isolation design uses the same custom-formulated durable isolation material as the Pixhawk 6X Pro, instead of the traditional foam design. Backed by extensive R&D and testing, it offers optimal IMU damping characteristics with a resonance frequency in the higher spectrum, perfect for industrial and commercial drone
Note:
* The Rev 8 Version is supported in the PX4 1.14.3 release or later, as well as the Ardupilot 4.5.0 stable release or later. It
ships with PX4 firmware by default. User can also use Ardupilot firmware by flashing the firmware via Mission Planner or
QGroundControl.
* Power module comparison chart
* The Rev 8 Version is supported in the PX4 1.14.3 release or later, as well as the Ardupilot 4.5.0 stable release or later. It
ships with PX4 firmware by default. User can also use Ardupilot firmware by flashing the firmware via Mission Planner or
QGroundControl.
* Power module comparison chart
Specification
Processors & Sensors
* FMU Processor: STM32H753 * 32 Bit Arm Cortex-M7, 480MHz, 2MB flash memory, 1MB RAM
* IO Processor: STM32F103 * 32 Bit Arm Cortex-M3, 72MHz, 64KB SRAM
* On-board sensors (Shipping Currently, Rev8) * Accel/Gyro: 3x ICM-45686 (with BalancedGyro Technology)
* Barometer: ICP20100 & BMP388
* Mag: BMM150
* On-board sensors (Previous Revision, Rev 3/4) * Accel/Gyro: BMI088/ICM-20649
* Accel/Gyro: ICM-42688-P
* Accel/Gyro: ICM-42670-P
* Mag: BMM150
* Barometer: 2x BMP388
* NXP EdgeLock SE050 Plug & Trust hardware secure element
Electrical data
* Voltage Ratings: * Max input voltage: 6V
* USB Power Input: 4.75~5.25V
* Servo Rail Input: 0~36V
* Current Ratings: * Telem1 output current limiter: 1.5A
* All other port combined output current limiter: 1.5A
* PWM Signal Voltage: * Default 3.3V (Adjustable to 5V with a change onboard resistor.)
Mechanical data
* Dimensions
Flight Controller Module: 38.8 x 31.8 x 16.8mm
* FMU Processor: STM32H753 * 32 Bit Arm Cortex-M7, 480MHz, 2MB flash memory, 1MB RAM
* IO Processor: STM32F103 * 32 Bit Arm Cortex-M3, 72MHz, 64KB SRAM
* On-board sensors (Shipping Currently, Rev8) * Accel/Gyro: 3x ICM-45686 (with BalancedGyro Technology)
* Barometer: ICP20100 & BMP388
* Mag: BMM150
* On-board sensors (Previous Revision, Rev 3/4) * Accel/Gyro: BMI088/ICM-20649
* Accel/Gyro: ICM-42688-P
* Accel/Gyro: ICM-42670-P
* Mag: BMM150
* Barometer: 2x BMP388
* NXP EdgeLock SE050 Plug & Trust hardware secure element
Electrical data
* Voltage Ratings: * Max input voltage: 6V
* USB Power Input: 4.75~5.25V
* Servo Rail Input: 0~36V
* Current Ratings: * Telem1 output current limiter: 1.5A
* All other port combined output current limiter: 1.5A
* PWM Signal Voltage: * Default 3.3V (Adjustable to 5V with a change onboard resistor.)
Mechanical data
* Dimensions
Flight Controller Module: 38.8 x 31.8 x 16.8mm
Standard Baseboard: 52.4 x 102 x 16.7mm (Aluminum)
Mini Baseboard: 43.4 x 72.8 x14.2 mm
* Weight
Flight Controller Module: 31.3g
* Weight
Flight Controller Module: 31.3g
Standard Baseboard: 72.5g (Aluminum)
Mini Baseboard: 26.5g
Company
1.Q : What's your advantage?
A : We have strong suppliers who can provide professional services and competitive prices
2.Q : How l believe you?
A :We have Alibaba's trade guarantee, and we can also provide you with some real-life photos of our products for you to check
3.Q :Can you give warranty of youpproducts?
A :Of course, if you have any quality or service issues, please feel free to contact us at any time, and we will provide you with professional after-sales service
4.Q :Where are you? Can I visit you?
A :Of course, you are welcome to visit our factory anytime
5.Q :How about the delivery time?
A :We usually expect to ship orders with inventory within seven days. If there is no stock available, the delivery time may change
| Welcome to inquiry for your needs, we are looking forward to cooperating with you, :) |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Huasheng Electronic Technology Co., Ltd.
Location
HB4082, Block B, Manha Market, 4th Floor, Extension Building, Sangda No.419 Building, Huaqiang North Road, Licun Community, Huaqiang North Subdistrict, Futian District, Shenzhen City, Guangdong Province, China
Contact Person
Chen