Hot Holybro SiK Telemetry Radio V3 100mW 500 433MH 915MHz Open-source Firmware Plug-n-play Pixhawk Flight Controllers
Price:
$65-69 / piece
MOQ:
10 pieces
Delivery Time:
Negotiable
Brand:
Holybro
Product Description
| Product Features | |
| Receive current: | 25 mA |
| Supply voltage: | 5V DC |
| private mold | No |
| place of origin | Guangdong,China |
| Transmit current: | 100 mA at 20dBm |
| Serial interface: | 3.3 V UART |
Features
This Holybro SiK Telemetry Radio is a small, light and inexpensive open source radio platform that typically allows ranges of better than 300m out of the box (the range can be extended to several kilometres with the use of a patch antenna on the ground).
This radio is plug-n-play all Pixhawk Standard and other Flight Controller, providing the easiest ways to setup a telemetry
connection between your Autopilot and a ground station. It uses open source firmware which has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Ardupilot, QGroundControl, PX4 Autopilot. The radios can be either 915Mhz or 433Mhz and you should purchase the model which is appropriate for your country/region. * Open-source SIK firmware
* Plug-n-play for Pixhawk Standard Flight Controllers
* Easiest way to connect your Autopilot and Ground Station
* Interchangeable air and ground radio
* Micro-USB port (Type-C Adapter Cable Included)
* 6-position JST-GH connector * 100 mW maximum output power (adjustable) -117 dBm receive sensitivity
* RP-SMA connector
* 2-way full-duplex communication through adaptive TDM UART interface
* Transparent serial link
* MAVLink protocol framing
* Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle
* Error correction corrects up to 25% of bit errors Open-source SIK firmware
* Configurable through Mission Planner & APM Planner
* FT230X/FT231 is a USB to BASIC UART IC
This radio is plug-n-play all Pixhawk Standard and other Flight Controller, providing the easiest ways to setup a telemetry
connection between your Autopilot and a ground station. It uses open source firmware which has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Ardupilot, QGroundControl, PX4 Autopilot. The radios can be either 915Mhz or 433Mhz and you should purchase the model which is appropriate for your country/region. * Open-source SIK firmware
* Plug-n-play for Pixhawk Standard Flight Controllers
* Easiest way to connect your Autopilot and Ground Station
* Interchangeable air and ground radio
* Micro-USB port (Type-C Adapter Cable Included)
* 6-position JST-GH connector * 100 mW maximum output power (adjustable) -117 dBm receive sensitivity
* RP-SMA connector
* 2-way full-duplex communication through adaptive TDM UART interface
* Transparent serial link
* MAVLink protocol framing
* Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle
* Error correction corrects up to 25% of bit errors Open-source SIK firmware
* Configurable through Mission Planner & APM Planner
* FT230X/FT231 is a USB to BASIC UART IC
Product Description
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Huasheng Electronic Technology Co., Ltd.
Location
HB4082, Block B, Manha Market, 4th Floor, Extension Building, Sangda No.419 Building, Huaqiang North Road, Licun Community, Huaqiang North Subdistrict, Futian District, Shenzhen City, Guangdong Province, China
Contact Person
Chen