Holybro PM02D Power Module 2S-12S 6pin Cable Supported by PX4 Regulated Power Supply for FPV Drone Parts
Price:
$24.06-27.50 / piece
MOQ:
2 pieces
Delivery Time:
Negotiable
Brand:
Holybro
Product Description
Product Description
Specification |
* Input voltage : 2S-12S |
* PCB Cont. Current Rating: 60A |
* PCB Burst Current Rating: 100A (<60 Sec) |
* Max current sensing: 327A |
* Voltage and current monitor with I2C compatible interface |
* Outputs 5.2V and 3A max |
* Weight: 20g |
Note
* PM02D HV version is supported by PX4. For Ardupilot, it is supported in version 4.4 and later. Full setup guide can be found here.
* This PM uses I2C digital signal data output, Compatible with Pixhawk 5X/6X Series. * NOT compatible with flight controller that uses analog PM such as the Pixhawk 6C & Mini, Pixhawk4 & Mini, pix32 v5, or Durandal flight controllers.
* PM02D HV version is supported by PX4. For Ardupilot, it is supported in version 4.4 and later. Full setup guide can be found here.
* This PM uses I2C digital signal data output, Compatible with Pixhawk 5X/6X Series. * NOT compatible with flight controller that uses analog PM such as the Pixhawk 6C & Mini, Pixhawk4 & Mini, pix32 v5, or Durandal flight controllers.
PM02D provides regulated power supply for your Pixhawk® 5X & 6X from the battery, as well as current consumption and battery voltage measurements, all through a 6pin cable. The on-board switching regulator outputs 5.2V and a maximum of 3A from LiPo batteries up to 12S (HV). The Power Module comes completely assembled with XT60 connectors, wrapped in shrink tubing for physical damage protection.
It is not designed to power servos, please use your aircraft's ESC/BEC for that. The Molex 2.00mm pitch CLIK-Mate Wire-to-Board connector is rated for 3.0A current per contact.
Current Rating:
The PM02D comes with XT60 plugs with 14 AWG silicone wires rated for 30A continuous current and 60A burst current (<1 minute). If a higher current is needed, the plug type and wire size should be changed accordingly. You can refer to this chart as reference.
The PM02D comes with XT60 plugs with 14 AWG silicone wires rated for 30A continuous current and 60A burst current (<1 minute). If a higher current is needed, the plug type and wire size should be changed accordingly. You can refer to this chart as reference.
PIN MAP:
Package Includes:
1x PM02D Power Module
1x 6pin 2.00mm pitch cable
1x PM02D Power Module
1x 6pin 2.00mm pitch cable
We still have more Cost-effective fpv drones and parts
FPV drone source factory, Supports customization
FPV drone spare parts, one-stop supply
FPV drone spare parts, one-stop supply
FAQ
Q1.Are you factory or trade company?
A1:We are factory and have our own production line with 10 levels of dust-free workshops professional trained production workers.
Q2.Could you offer OEM&ODM service?
A2:Yes,we are able to provide OEM&ODM service. The number of customization starts at 5.
Q3.Do you guarantee the quality of products?
A3:We offer 10 years warranty service and introduced complete quality management system as well as rigorous technical standards.
Q4.How long is the production cycle?
A4:Sample order is 4-5days. Bulk orders take 9-10 days.
Q5.What shipping ways do you have?
A5:We could ship the goods by DHL, UPS, Fedex, Air Mail.
Q6.Whats is the payment terms?
A6:T/T, Ablibaba trade assurance.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Huasheng Electronic Technology Co., Ltd.
Location
HB4082, Block B, Manha Market, 4th Floor, Extension Building, Sangda No.419 Building, Huaqiang North Road, Licun Community, Huaqiang North Subdistrict, Futian District, Shenzhen City, Guangdong Province, China
Contact Person
Chen