640×512 15μm TEC Cooled SWIR InGaAs Camera 50fps GigE GS-SW640171550-C-G
GS-SW640171550-C-G is high-performance TEC cooled short-wave infrared camera covering 0.9–1.7μm spectral band. It adopts 640×512 InGaAs FPA with 15μm pixel size, supporting max 50Hz full-frame frame rate. Standard GigE RJ45 digital transmission is equipped; PAL/NTSC analog video via SMA interface can be customized synchronously. The camera is fitted with adjustable TEC cooling module to reduce dark current interference during long continuous capturing. Arbitrary-position ROI function is supported to lift frame rate for fast-moving small targets, and onboard centroid tracking can be integrated upon project demand. Interchangeable C/CS lens mount enables seamless matching with spectrometers and custom optoelectronic equipment. Exclusive display control software and complete cross-platform SDK with demo codes are supplied for secondary development. All cameras pass ISO & CE quality inspection, OEM housing and function customization service is supported.
- High-sensitivity InGaAs chip, quantum efficiency over 70% within 1.0μm–1.6μm waveband
- 640×512 resolution with 15μm pixel, stable 50Hz full-frame continuous imaging
- Adjustable built-in TEC cooling to maintain uniform low-noise image output
- Independent auto/manual exposure & gain control, real-time non-uniformity and dead pixel correction
- GigE high-speed 8/14bit digital transmission, analog video customizable on request
- Freely adjustable arbitrary ROI to accelerate frame rate for high-speed target capture
- Global shutter, compatible with dual TTL/LVDS external trigger signals
- Optional onboard centroid tracking dedicated to laser spot detection scenarios
- Interchangeable C/CS lens mount, reserved M3 & 1/4″ multi-standard mounting holes
- Unified 60×60×67mm compact housing, wide -40℃~+55℃ operating temperature range
| Model | GS-SW640171550-C-G |
|---|---|
| Detector type | InGaAs FPA |
| Spectral range | 0.9μm ~ 1.7μm |
| Resolution | 640 x 512 |
| Pixel size | 15μm |
| Active area | 9.6mm x 7.68mm |
| Quantum efficiency | >70%@(1.0μm-1.6μm) |
| Pixel Operability | ＞99.5% |
| Cooler type | TEC Cooled |
| Maximum frame rate | 50Hz |
| ROI | Support ROI at any position |
| Shutter type | Global shutter |
| Exposure time | 1μs—1/frame |
| Digital output format | 8/14bit GigE |
| Analog video output | PAL/NTSC (Optional, customized upon request) |
| Onboard image processing | Auto/Manual Exposure; Auto/Manual Gain; Non-uniformity Correction; Pixels correction |
| Image function | Frame rate selection, synchronization method selection, contrast/brightness adjustment (manual), enhancement, test image, information saved, Cross indication. |
| Electrical interface | HR10 |
| Digital interface | RJ45@GigE |
| Analog interface | SMA (Optional customized part) |
| External trigger port | TTL/LVDS |
| Lens mount | C/CS |
| Tripod mount | 8×M3/1/4″-20 |
| Power input | 12V DC |
| Power consumption | ＜5W TEC off |
| Operation temperature | -40℃ ~ +55℃ |
| Storage temperature | -50℃ ~ +65℃ |
| Weight | ≤310g(no lens) |
| Dimensions | ≤60mm x 60mm x 67mm |
Note: Specifications are for reference only and subject to change without prior notice.
Low-light imaging, Medical & scientific spectral imaging, Hyperspectral inspection, Laser spot tracking imaging, High-temperature thermal detection, Remote sensing search & rescue, Camouflage target identification, Industrial garbage sorting, Semiconductor internal defect inspection
Q1: What cooling configuration does this camera adopt?
A: It is equipped with adjustable built-in TEC cooling to restrain dark current and guarantee stable long-exposure imaging.
Q2: Can laser centroid tracking function be integrated?
A: Yes, the onboard centroid tracking algorithm can be added according to project requirements.
Q3: What external trigger signals are supported?
A: It supports both TTL and LVDS dual-channel external trigger for synchronous testing equipment.
Q4: Can SDK and OEM customization be provided?
A: Matching display software and complete cross-platform SDK are supplied, customized housing and imaging functions are available for OEM orders.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.