95mm 20oz 600ml Freeze-Resistant PET Ice Cup for Large Cold Drinks

For beverage shops that sell a true 20oz / 600ml large cold drink, the cup needs enough working room at the top for ice while still leaving sufficient volume for the intended liquid portion. If the opening is too restrictive or the usable space is limited, staff may need to slow down ice loading, reduce liquid, or adjust the final fill level from one order to the next. This 95mm PET ice cup combines a wide working opening with a full 600ml serving size, making it suitable for large iced tea, milk tea, fruit drinks, and other high-ice beverages where portion consistency matters. Made from PET through stretch blow molding, the cup measures 146mm high with a 58mm bottom diameter, weighs 16g, and is specified for -20°C to 60°C cold-service use. Batch inspection should keep the rim, dimensions, weight, and approved print position aligned with the confirmed sample so repeat orders remain consistent. For custom logo and OEM options, please contact us directly.

 Technical Specifications

 FAQ

1. Is the 95mm opening suitable for drinks with a large amount of ice?

The 95mm opening gives staff more working space when loading ice and finishing a large drink. Buyers should test the actual ice size together with the intended lid before confirming the final setup.

2. How should we confirm whether 600ml works for our 20oz recipe?

Prepare the real drink using the normal ice and liquid quantities, then check the finished fill level. This provides a clear serving reference before the cup is introduced into regular use.

3. What should be checked when placing a repeat order?

Use the approved sample to verify the 95mm rim, 146mm height, 58mm bottom diameter, 16g weight, and confirmed print position so repeat batches remain aligned.