PTM Card
Technical specifications
| Project | Metric | Unit | Remarks |
|---|---|---|---|
| LINE In to C61/60 Out/In |
≤1.3 |
dB |
|
| LINE In to SIG Out |
≤1.3 |
dB |
|
| Insertion Loss (SIG In to LINE Out) | ≤0.3 | dB |
|
| Line Delay Difference (LINE In to PTPC61Out/In) | ≤±1 | ns |
|
| Line Delay Difference (LINE Out to PTPC60Out/In) | ≤±1 | ns |
|
Related Euipment
DCI5800-1A
DCI5800 is an industry-leading innovative DCI OTN transmission platform launched by ISEELINK. DCI5800 has the characteristics of small size, large capacity service access, long distance transmission, Web GUI simple and convenient operation and management, reliable operation and energy saving and emission reduction, which effectively meets the needs of long-distance and large bandwidth user data center interconnection transmission. The DCI5800 features a modular design that enables both optical-electrical decoupling for cost reduction and integrated management within the same chassis. With SDN capabilities, it creates an intelligent and open network architecture. The system supports the YANG model interface based on the NetConf/YANG protocol, while also offering multiple management methods including Web GUI, CLI, NetConf,and SNMP for streamlined operations.
DCI5800-2A
DCI5800 is an industry-leading innovative DCI OTN transmission platform launched by ISEELINK. DCI5800 has the characteristics of small size, large capacity service access, long distance transmission, Web GUI simple and convenient operation and management, reliable operation and energy saving and emission reduction, which effectively meets the needs of long-distance and large bandwidth user data center interconnection transmission. The DCI5800 features a modular design that enables both optical-electrical decoupling for cost reduction and integrated management within the same chassis. With SDN capabilities, it creates an intelligent and open network architecture. The system supports the YANG model interface based on the NetConf/YANG protocol, while also offering multiple management methods including Web GUI, CLI, NetConf,and SNMP for streamlined operations.
DCI3100
The DCI3100 integrated wavelength division equipment is developed by ISEELINK for data center interconnection (DCI) scenarios. It has the outstanding characteristics of large capacity, small size, low energy consumption and high cost performance.Housed in standard 1U chassis, this device supports max 1.6T (16*100G) capacity and can be smoothly expanded to 3.2T capacity through device stacking.Adopting high-density optoelectronic integration technology, OSP3100 avoids complex fiber jumper connections with its unique switch-like design and brings ultimate user experience by its extremely simple installation.
OMD96 Equipment
The passive MUX device for signal splitting operates independently of the sub-frame chassis and can be installed in a standard 19-inch data cabinet, with a height of 1U.
OMD48 Equipment
The passive MUX device for signal splitting operates independently of the sub-frame chassis and can be installed in a standard 19-inch data cabinet, with a height of 1U.
OLA Card
The Optica Linel Amplifier Module delivers a versatile, low-noise solution for erbium-doped fiber amplifiers (EDFA). This compact module operates with constant gain (Automatic Gain Control, AGC) and constant output power (Automatic Power Control, APC), featuring a highly integrated design. The large-format module supports dual amplifiers with two independent gain units, the card occupies only 1/4 standard slot capacity.
OPA Card
The Optical Pre Amplifier Module delivers a versatile, low-noise solution for erbium-doped fiber amplifiers (EDFA). This compact module operates with constant gain (Automatic Gain Control, AGC) and constant output power (Automatic Power Control, APC), featuring a highly integrated design. The large-format module supports dual amplifiers with two independent gain units, the card occupies only 1/4 standard slot capacity.
OBA Card
The Optical Boost Amplifier Module delivers a versatile, low-noise solution for erbium-doped fiber amplifiers (EDFA). This compact module operates with constant gain (Automatic Gain Control, AGC) and constant output power (Automatic Power Control, APC), featuring a highly integrated design. The large-format module supports dual amplifiers with two independent gain units, the card occupies only 1/4 standard slot capacity.
M8X2 Card
400G Transponder Card
T8E2 Card
800G Tmux Card
T4Q2 Card
400G Transponder Card
T4Q1 Card
400G Transponder Card
M2H10D1
200G Muxponder Card
4U Chassis Ethernet Interface Card
4U Chassis Ethernet Interface Card
POWER Card
Power Card
2U Chassis Ethernet Interface Card
U Chassis Ethernet Interface Card
2U/4U Chassis FAN Card
2U/4U Chassis FAN Card
2U/4U Chassis NMU Card
2U/4U Chassis NMU Card
Related Resources
|
ISEELINK DCI5800 Product Specifications |
PDF - 5.53 MB - Updated on Wednesday, March 25, 2026 |
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.