JUSHUO GH125-S15DCA-00
Price:
Negotiable
MOQ:
5
Delivery Time:
1 working day
Brand:
GH125-S15DCA-00
Product Description
Product Overview
This product acknowledgment document details the specifications for the 1.25mm pitch horizontal SMT connector with latch, model GH125-S**DCA-00. It covers standard ratings, packaging, transportation, storage, component materials, appearance, electrical characteristics, environmental characteristics, and mechanical properties. This specification is applicable to the GH series products.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specifications | Test Method | Performance Requirements |
| 4. Standard Rating | |||
| Rated voltage | 50V | ||
| Rated current | 1.0A AC/DC | ||
| Operating temperature range | -2585 | ||
| Operating humidity range | Relative humidity is below 90% | ||
| 7. Component Name/Material | |||
| Part name | Model | Material | |
| Base | GH | LCP E130i | |
| Pin | GH | Phosphor copper | |
| Stator | GH | Phosphor copper | |
| 9. Electrical Characteristics | |||
| Contact resistance | Plug in the connector and test with a contact resistance meter. | 20m Max | |
| Insulation resistance | Apply 100V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | 500M Min | |
| Withstand voltage | Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover | |
| 10. Environmental Characteristics | |||
| Heating test | Appearance: no damage. Contact resistance: 60m Max. | Place plug connector in +852 for 96H, then in normal environment for 1-2H. | |
| Cold tolerance test | Appearance: no damage. Contact resistance: 60m Max. | Place plug connector in -252 for 96H, then in normal environment for 1-2H. | |
| Moisture resistance test | Appearance: no damage. Insulation resistance: 60M Min. Withstand voltage: 250V AC/minute MIN. | Place plug connector in 402, 90-96% RH for 96H, then in normal environment for 1-2H. | |
| Temperature cycle | Appearance: no abnormality. Contact resistance: 60m Max. | 5 cycles of -253 (30min), room temp (1H), +853 (30min), room temp (1H), then recover 2H. | |
| Salt Spray Test | Appearance: no damage or corrosion. Contact resistance: 60m Max. | Continuous spray with 51% NaCl solution for 24H, then rinse with distilled water and recover 1-2H. | |
| Weldability | Tin area above 95% | Dip in 2605 tin solution for 2.50.5 seconds. | |
| Soldering resistance | 1. Plastic parts: no obvious deformation, damage, or blistering. 2. Electrical characteristics must meet specifications. | Reflow or wave soldering at 2605 for 51S. | |
| 11. Mechanical Properties | |||
| Pin fixing force | Single pin 5N min | Apply force at front end of pin at 253mm/min rate until pin withdraws. | |
| Terminal retention in plastic parts | Single terminal: 7N min | Pull terminal from socket at 253mm/min rate along wire direction. | |
| Mechanical life | Contact resistance: 80m Max | Plug and unplug 30 times at 10 times/min speed without power. | |
| Terminal crimp wire strength | 26AWG wire 17.8N | Axial pullout force at 253mm/min rate. | |
| Terminal crimp wire strength | 28AWG wire 8.9N | Axial pullout force at 253mm/min rate. | |
| Terminal crimp wire strength | 30AWG wire 4.4N | Axial pullout force at 253mm/min rate. | |
| Terminal crimp wire strength | 32AWG wire 2.2N | Axial pullout force at 253mm/min rate. | |
| Insertion/Pull-out force | Insertion force 2N(Per pin) Pullout force 0.3N(Per pin) | Fit hole seat and terminal, insert/remove on same axis. Remove lock. Test speed: 205mm/min. | |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales