HCTL HC-PH-6A-G
Price:
Negotiable
MOQ:
1
Delivery Time:
1 working day
Brand:
HC-PH-6A-G
Product Description
Product Overview
This specification details the PH 2.00MM Pitch PH Connector Double Row Type, model number HC-PH-****. It is designed for electrical connections and is suitable for use in various environmental conditions. The connector is compliant with relevant GB/T standards for electrical connectors and environmental testing.
Product Attributes
- Brand: (HCTLDZ)
- Origin: Shenzhen, China
- Material (Terminal Contact): Phosphor bronze (0.2mm thickness) with Tin plating (3-5m)
- Material (Housing Plastic): Nylon66 UL94V-0, Color: White
- Material (Pin): Brass (0.50mm thickness) with Tin plating (2.5-5m), Color: Beige
- Certifications: UL94V-0
Technical Specifications
| Item | Specification | Requirement | Test Method |
| 3. Use Condition | |||
| Ambient Temperature Range | -25 +85 | ||
| Applicable Wire Sizes | AWG #2228 | ||
| Applicable PC board thickness | 1.6mm | ||
| 4. Appearance and Dimension | |||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust, plating not oxides and not peeled | ||
| Dimension | According to drawings | ||
| Exchangeable | Exchangeable with same specification products | ||
| 5. Material | |||
| Terminal Contact | Phosphor bronze, 0.2mm thickness, Tin plating: 35 m | ||
| Housing Plastic | Nylon66 UL94V-0, Color: White | ||
| Pin | Brass, 0.50mm thickness, Tin plating: 2.55 m, Color: Beige | ||
| 6. Electrical Performance | |||
| Rated Voltage | 250V AC/DC | ||
| Rated Current | 2A AC/DC | ||
| Contact Resistance | Initial value 20 | 20m | Apply a maximum voltage of 20mV and maximum current of 100mA to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | 1000 M | 1000 M | Apply 500V DC (rms) for 1 minute between adjacent contacts |
| Withstand voltage | No breakdown or flashover | Apply 800V AC (rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors | |
| 7. Mechanical Performance | |||
| Single contact insertion force | 6N | 6N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Single contact Withdrawal force | 0.5N | 0.5N | The terminal and the hole seat at a react per minute to 25 3mm along the write direction are pulled out from the hole in the seat capacity |
| Terminal crimping Wire strength | AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N | Axial per minute to 25 3mm rate of the pullout force | |
| Pin Retention Force | 15N | 15N | Exerts a force on the pin end at a rate per Minute 253mm until the needle exit |
| Seat pull-out force | 15N | 15N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Durability | Contact Resistance 30m | 30m | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current interruption: 1 sec Max, Contact Resistance 30m | Amplitude: 1.5mm p-p, Frequency: 10-55-10Hz/minute, Duration: 2 hours for each direction (X, Y, Z axis) | |
| 8. Endurance Characteristics | |||
| Thermal Aging | Appearance: No damage, Contact Resistance 30m | 30m | Temperature: 852, Period: 96 hours continuously |
| Temperature rise | Measure the temperature rise of contact when the maximum rated current is passed | ||
| Constant Humidity | Appearance: No damage, Contact Resistance 30m , Insulation Resistance 500m | 30m , 500m | Temperature:402 C, Relative humidity: 90-95% (RH), Period: 96 hours continuously |
| Temperature cycling | Appearance: No damage, No breakdown or flashover | One cycle consists of -55 3 C 30min, 85 3C 30min, room temp 10-15min transition. Total cycle: 5 cycles | |
| Salt spray | Appearance: No damage, Contact Resistance 30m | 30m | Temperature: 353 C, Concentration: 51% NaCl solution, Period: 8 hours (post-stamping plating) or 24 hours (pre-stamping plating) |
| Solder ability | Soldering area: 90 % | 90 % | Solder temperature: 245 5C, Immersion period: 3 0.5S |
| Resistance to soldering heat | Appearance: No damage | Manual soldering: 350 5 for 3 0.5S. Wave soldering: 2305 for 50.5S. Position: 1.5mm from conductor/fixing piece end. | |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales