HRS DF11-4DS-2R26(05)
Price:
Negotiable
MOQ:
107
Delivery Time:
15-18 working days
Brand:
DF11-4DS-2R26(05)
Product Description
Product Overview
The DF11 Series offers a 2.0mm pitch, double-row connector compliant with UL/CSA standards. This series is designed for reliable wire-to-board connections, featuring various specifications for different wire gauges and applications.
Brand
HIROSE ELECTRIC CO., LTD.
Product Line
DF11 Series
Pitch
2.0mm
Configuration
Double-Row Connector
Certifications
UL/CSA Compliant
| Item | Specification | Condition | Wire Size | Rated Current | Rated Voltage |
|---|---|---|---|---|---|
| Ratings | Crimping | 22 to 26 AWG | 2A | 250V AC | |
| Ratings | Insulation Displacement | 28 AWG | 1A | 100V AC | |
| Ratings | Insulation Displacement | 30 AWG | 0.5A | 100V AC | |
| Ratings | Insulation Displacement | 26 AWG | 1A | 100V AC | |
| Operating Temperature Range | -30 to +85C | (Note 2) | |||
| Operating Humidity Range | 40 to 80% | (Note 3) | |||
| Storage Temperature Range | -10 to +60C | (Note 4) | |||
| Storage Humidity Range | 40 to 70% | (Note 4) | |||
| UL, CSA Safety Standard Approved Specification | Wire Size | 22 AWG | 2A | 30V AC | |
| UL, CSA Safety Standard Approved Specification | Wire Size | 24 to 28 AWG | 1A | 30V AC | |
| UL, CSA Safety Standard Approved Specification | Wire Size | 30 AWG | 0.5A | 30V AC | |
| Item | Insulation Resistance | 500V DC | 1000M Min. | ||
| Item | Withstanding Voltage | 650V AC for 1 min. | No flashover or insulation breakdown. | ||
| Item | Contact Resistance | 100mA | 30m Max. | ||
| Item | Single Insertion/Extraction Force | Measured by the square steel pin at 0.50.002mm | 0.3N (30gf) Min. / 4.4N (450gf) Max. | ||
| Item | Vibration | Frequency : 10 to 55Hz, single amplitude of 0.75mm, 2 hours in each of the 3 directions. | No electrical discontinuity of 1s or more | ||
| Item | Humidity (Steady State) | 96 hours at temperature of 402C and humidity of 90 to 95% | Contact Resistance : 30m Max. / Insulation Resistance : 500M Min. | ||
| Item | Temperature Cycle | (-55C : 30 minutes 5 to 35C : 10 minutes 85C : 30 minutes 5 to 35C : 10 minutes) 5 cycles | Contact Resistance : 30m Max. / Insulation Resistance : 1000M Min. | ||
| Item | Mating Durability | Tin Plated : 30 cycles, Gold Plated : 50 cycles | |||
| Item | Resistance to Soldering Heat | Flow : 260C for 10 seconds | Through Hole | Manual soldering : 300C for 2 seconds | |
| Item | Resistance to Soldering Heat | Reflow : At the SMT recommended temperature profile | Manual soldering : 300C for 3 seconds |
| Soldering Condition (SMT) | Temperature | Time |
|---|---|---|
| Recommended Soldering iron | 290 10C | Within 2 seconds |
| Recommended Screen Thickness | 0.15 to 0.2mm | |
| Board Warpage | 0.03mm Max. (in connector center area) |
| Soldering Condition (Through-hole) | Temperature | Time |
|---|---|---|
| Recommended Flow Soldering | 250C | 10 seconds |
| Manual soldering | 290 10C | 2 seconds |
Precautions & Handling Instructions
- When inserting the crimp terminal into the IDC socket, do not insert diagonally to maintain performance reliability.
- Please refrain from insertion and removal when not mounted to the board, as it may result in damage or deformation of the contacts.
- Do not remove the product by holding the cable, as it may result in damage.
- When soldering by hand, do not apply flux that may result in flux rising.
- There may be slight variation in mold coloration based on production lot, but this does not affect product performance.
- Refer to the following documents when handling this product: Crimp Quality Standard (ETAD-H0773-00, ETAD-H0835-00), Cable Assembly Procedure (ETAD-H0965-00), Wire-to-Board Connector Use Handbook.
- Specifications mentioned in this catalog are reference values. Please confirm the "Drawing" and "Product Specifications" sheets when considering to order or use this product.
- Use an appropriate cable when using the connector in combination with cables. If considering usage of a non-specified cable, please contact your sales representative.
- If assembly process is done by jigs & tools which are not identified by Hirose, assurance will not be given.
- Please consult with your Hirose sales representative if you are planning to use the product for any of the following applications: Automotive, medical, public infrastructure, aerospace/defense, etc.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen ECER Network Technology Co., Ltd.
Location
Unit A2603, One Avenue (South Zone), Zhuoyue Meilin Center Plaza, No. 126 Zhongkang Road, Meidu Community, Meilin Subdistrict, Futian District, Shenzhen
Contact Person
Sales